User's Manual

Table Of Contents

Internet Telephony PBX System

IPX-330/IPX-2100/IPX-2200/IPX-2500

The products and programs described in this User’s Manual are licensed products of PLANET

Technology. This User’s Manual contains proprietary information protected by copyright, and

this User’s Manual and all accompanying hardware, software, and documentation are

copyrighted.

No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced

to any electronic medium or machine-readable form by any means by electronic or mechanical

including photocopying, recording, or information storage and retrieval systems, for any

purpose other than the purchaser's personal use, and without the prior written permission of

PLANET Technology.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments

and applications, and makes no warranty and representation, either implied or expressed, with

respect to the quality, performance, merchantability, or fitness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET

disclaims liability for any inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent a

commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies

that may be contained in this User’s Manual. PLANET makes no commitment to update or

keep current the information in this User’s Manual, and reserves the right to make

improvements to this User’s Manual and/or to the products described in this User’s Manual, at

any time without notice.

If user finds information in this manual that is incorrect, misleading, or incomplete, we would

appreciate user comments and suggestions.

CE Mark Warning

This is a class B device. In a domestic environment, this product may cause radio interference,

in which case the user may be required to take adequate measures.

Energy Saving Note of the Device

This power required device does not support Standby mode operation. For energy saving,

please remove the DC-plug or push the hardware Power Switch to OFF position to disconnect

the device from the power circuit.

Without removing the DC-plug or switching off the device, the device will still consume power

from the power circuit. In view of Saving the Energy and reducing the unnecessary power

consumption, it is strongly suggested to switch off or remove the DC-plug from the device if

this device is not intended to be active.