User's Manual

- 116 -
backup.
Path: Maintenance -> Backup
You may click on the button to take a backup of your IPPBX system when necessary. A backup file will be
generated.
File name is generated according to the software version, date and exact time when the backup is performed. You
may click on button to download the backup to you operating system. Or click on button to delete it
from the IPPBX system.
When you want to restore the backup, you may click on the button. Restoring a backup will cause the system
reboot, so please make sure there are no phone calls going on in the IPPBX system before you doing this.
If you are going to restore an offline backup (backup downloaded to your operating system) please click on the
button.
Backups will not be cleared after a system reset. So you may not need to download the backup to your
operating system. And after a system reset, you may skip the quick setup wizard and go to the backup
page to restore a backup directly to recover your previous configurations.
Reboot and Reset
Reboot
Path: Maintenance -> Reboot and Reset
By clicking on the button you may restart your IPPBX from the web UI. Restart the IPPBX system will
terminate all active phone calls, please make sure there’re no phone calls going on before restarting the IPPBX
system.
With version 3 series IPPBX, restarting each of the IPPBX model the time it takes for the services to back on is as in
below chart.
IPX-330
IPX-2100
IPX-2200
IPX-2500
Phone call
2mins
2mins
1.5mins
1.5mins
Web UI
4mins
4mins
2mins
2mins
Reset
Path: Maintenance -> Reboot and Reset
To reset IPX-330 and IPX-2100 please refer to below 3 reset methods (Method 1, Method 2 and Method 3).
To reset IPX-2200 and IPX-2500 there’s only 1 way, please refer to Method 1.