User's Manual

- 101 -
 Enable 40/148-bit encryption for MPPE: Tick to enable 40-bit key (standard) or 128-bit key (strong) MPPE
encryption schemes.
 Server Address: PPTP VPN server public IP.
 Username: PPTP VPN user name given by the VPN server.
 Password: PPTP VPN user password given by the VPN server.
 Default Gateway: If enabled, all network traffic will go through the PPTP VPN connection.
Once done, click on the button to continue, and now you may click on Enable switch to turn on PPTP VPN
client.
Later it should be connected to the PPTP VPN server, and the connection status will be displayed in the VPN Client
Status section.
In the VPN client status section the VPN client IP, the VPN type and the connection status will be displayed.