User's Manual

- 100 -
 Enable MPPE128 Encryption: Microsoft Point-to-Point Encryption (MPPE) encrypts data in Point-to-Point
Protocol (PPP)-based dial-up connections or Point-to-Point Tunneling Protocol (PPTP) virtual private network
(VPN) connections with 128-bit key.
 Debug: Enable debug for PPTP VPN connection, debug information will be written into system logs.
Once server configurations are done, you may create PPTP client users, each user created is for a VPN client to
connect. PPTP VPN server on IPPBX can connect up to 20 PPTP VPN clients.
Remember to set the Availability to Yes, when you don’t want this user to connect, just set Availability to No or
you may remove the user from the VPN user list.
Finally click on the Enable switch to turn the PPTP VPN server on.
PPTP VPN Client
To configure PPTP VPN client, please click on the button to show the configurations.
Configure PPTP VPN client settings before enabling it.