User's Manual

- 94 -
Network Settings
Network Profiles
Path: System -> Network Settings -> Network Profiles
Network profiles could be configured through the quick setup wizard at the initial setup of the IPPBX system.
When modification of the network profiles is required, it could be done here.
The WAN network interface of IPPBXs could be configured to work in Static IP or DHCP mode. In most cases assign
a static IP would be the best practice. As all the IP phones will communicate with the IPPBX through this IP
address.
On WAN port, gateway and DNS could be configured so the IPPBX could have Internet access. As a result, SIP
trunking and remote extensions could work.
As for LAN, it’s only used when you don’t want the IPPBX system to have Internet access.
Default IP on LAN port is 192.168.0.1 -- you may change this IP but LAN IP should NOT be in the same network
segment as WAN port.