Quick Guide

12
5.2 Web Admin Login
After going through the quick installation wizard, the system will reboot for the
new settings to take effect. Please wait for about 4 minutes for the Web page to
refresh, and then you'll see the login screen like below.
The admin user name and password are dened by during the installation wizard
process. If you have skipped the wizard, you’ll need to log in with the default
username and password which are both “admin”. Once you have modied the
network prole during the quick installation wizard or after admin login, then you
can power off and deploy the IPPBX system to your local LAN, and then power it
onforfurthercongurations.
(Default IP) For increased security, please use https to access IP PBX.
Default WAN IP: https://172.16.0.1
Default LAN IP: https://192.168.0.1
Default User Name: admin
Default Password: admin
Note
For security reason, please change and memorize the new pass-
word after this first setup.