User's Manual

- 90 -
System
Storage
Data storage allows you to upload your recording files, log files and voicemail messages to an FTP server through
the Ethernet. Or you may attach an external USB drive to the IPPBX USB interface for saving the above-mentioned
files.
USB Storage
Path: System -> Storage -> USB Storage
On IPX-330 and IPX-2100 there’s only 1 USB interface, on IPX-2200 and IPX-2500 there are 2 on the back panel.
USB drives could be attached to the USB interface for data backup, only 1 USB drive supported on the IPX-2200
and IPX-2500.
Supported USB file system formats are: FAT16, FAT32, exFAT, NTFS, EXT3 and EXT4. If it's a portable USB hard drive,
please make sure it uses external power supply. And please make sure the USB drive only has a single partition,
otherwise it won’t be detected by the IPPBX system.
Before attaching the USB drive and configuring data storage settings, please make sure no one else is signed in the
IPPBX web UI and there’s no phone call going on in the system. Because during the configuration process of USB
data storage, the recordings, logs and voicemails generated would be lost.
Once a USB drive is detected, you’ll see the USB Mount Status changed to Connected. Refresh the status by
clicking on the button if nothing happens when you have attached the USB drive.
Now you may enable USB storage and configure which kind of files to be saved in the USB drive.
Once done click on the button and it will start to create folders on the USB drive and upload the existing
files to the USB drive too.