User's Manual

- 114 -
Traceroute
The traceroute command is used to discover the routes that the packets actually took while traveling to their
destination.
Path: Maintenance -> Diagnostic -> Traceroute
In the IP Address/Domain Name field specify the IP or domain name that you want to lookup and click on
button to begin tracing.
During the whole process each step will output in the Results field, you can view which routes the packets have
taken before reaching their final destination.
Ethernet Capture
Ethernet capture uses TCPDUMP which is a common pocket analyzer allows users to capture TCP/IP and other
packets being transmitted or received over a network to which the IPPBX is attached. The captured packets can be
downloaded from the IPPBX system and been analyzed on your Windows PC to display the SIP traffic details. It can
be used to debug a VoIP call problem.
Path: Maintenance -> Diagnostic -> Ethernet Capture
To capture the network traffic, you need to select the network interface according to on which the IPPBX system is
working on. Then click on the button to start capturing the network traffic.