Internet Telephony PBX System (30/100/200/500 SIP Users Registrations) IPX-330/IPX-2100/IPX-2200/IPX-2500 Quick Installation Guide
Table of Contents 1. Internet Telephony PBX System.................................................................... 3 1.1. Package Contents................................................................................. 3 1.2 Hardware Installation............................................................................ 4 1.2.1 Safety Instructions...................................................................... 4 1.2.2 Placement..............................................................
1. Internet Telephony PBX System 1.1. Package Contents Thank you for purchasing PLANET Internet Telephony PBX system. This Quick Installation Guide will introduce how to finish the basic setting of connecting the web management interface and the Internet. Open the box of the Internet Telephony PBX system and carefully unpack it.
1.2 Hardware Installation The following are instructions for setting up PLANET Internet Telephony PBX system. Refer to the illustration and follow the simple steps below to quickly install your Internet Telephony PBX system. 1.2.1 Safety Instructions The following are the safety instructions for Internet Telephony PBX system before installing. The maximum operating temperature of the Internet Telephony PBX system is 0~40°C, which allows sufficient air circulation.
2. IPX-330 2.1 Physical Introduction Internet Telephony PBX System PWR WAN LAN 1 2 SYS Ready/Act Ringing IPX-330 Front Panel of the IPX-330 FXO USB 2 12V DC 1 Console LAN Reset WAN Rear Panel of the IPX-330 2.1.
2.1.
3. IPX-2100 3.1 Physical Introduction WAN LAN LNK ACT 1 2 3 Internet Telephony PBX System SLOT 2 SLOT 1 PWR SYS 4 FXS Ready/Act 1 2 3 4 FXO/GSM Ringing IPX-2100 Front Panel of the IPX-2100 12V DC SLOT 2 SLOT 1 USB Console LAN WAN Reset Power Rear Panel of the IPX-2100 1. Supporting 2 slots, user can buy expansion module like IPX-21FO (4 x FXO) or IPX-21GS (4 x GSM) for extending port service. 2. If IPX-21GS is used, please disable pin lock function.
3.1.
4. IPX-2200 / IPX-2500 4.1 Physical Introduction SYS WAN LAN 1 2 3 4 FXO/GSM FXS Ringing 4 FXO/GSM FXS Ringing SLOT 2 SLOT 1 PWR 4 1 2 3 Internet Telephony PBX System IPX-2200 Front Panel of the IPX-2200 SLOT 2 SLOT 1 PWR SYS WAN LAN 1 2 3 4 1 2 3 Internet Telephony PBX System IPX-2500 Front Panel of the IPX-2500 100~240V AC USB SLOT 2 HDMI LAN WAN SLOT 1 Rear Panel of the IPX-2200 / IPX-2500 1.
4.1.
5. Basic System Configuration 5.1 New System Setup Wizard Step 1. Connect a PC directly with the IP PBX on WAN or LAN port. Default IP of WAN port is 172.16.0.1, and default IP of LAN port is 192.168.0.1. Please change the PC IP address to 172.16.0.xx if you have connected WAN, or 192.168.1.xx if you have connected LAN. Step 2. Start a web browser. The browser should be IE11, Firefox or Google Chrome. Step 3. Enter the default URL of WAN port “https://172.16.0.1” or enter URL of LAN port “https://192.168.0.
5.2 Web Admin Login After going through the quick installation wizard, the system will reboot for the new settings to take effect. Please wait for about 4 minutes for the Web page to refresh, and then you'll see the login screen like below. The admin user name and password are defined by during the installation wizard process. If you have skipped the wizard, you’ll need to log in with the default username and password which are both “admin”.
Status Page of the IP PBX 5.2.1 Configuring the Network Setting Step 1.
Network Profiles Page Step 2. Edit your WAN port IP information. There are two types of Ethernet port connection and they are Static IP and DHCP. You can find a detailed setting process in the user manual.
5.2.2 Changing IP Address or forgotten Admin Password To reset the IP address to the default IP address “192.168.0.1” (LAN) or reset the login password to default value, press the reset button on the front panel for more than 6 seconds. After the device is rebooted, you can login the management Web interface within the same subnet of 192.168.0.x. Note After pressing the “Reset” button, all the system data will be reset to default; if possible, back up the config file before resetting.
6. Further Configuration Thank you for purchasing PLANET products. The above steps introduce the simple configurations of the IPX-330, IPX-2100, IPX-2200 and IPX-2500. For further configuration, please refer to the user’s manual. If you have other questions, please contact the local dealer or distributor where you purchased this product. PLANET IPX series user’s manual: IPX-330 IPX-2100 http://www.planet.com.tw/en/support/ download.php?view=3&key=IPX-330#list http://www.planet.com.
