Datasheet

IPOE-E302
1
Outdoor 802.3bt PoE++ Solution for Breaking RJ45 100m Limitation
PLANET IPOE-E302 is an industrial IP67-rated 1-port 802.3bt PoE++ to 2-port
802.3bt/at Gigabit PoE Extender designed especially for point to multipoint PoE
application. The IPOE-E302 can obtain a maximum of 95-watt PoE power from
802.3bt PoE++ or PoH (Power over HDBASE-T) input port and supplies a
maximum of 65-watt PoE power budget for 2 PoE output ports, extending both the
Gigabit Ethernet Data and 802.3at Power over Ethernet over the UTP cable.
The IPOE-E302 provides a simple solution for adding PoE ports without running
more cabling and achieves more flexible network applications without requiring an
external power adapter.
Physical Port
• Three 10/100/1000BASE-T Gigabit RJ45 ports
– 1-port data + power input
– 2-port data + power output
Power over Ethernet
• 1-port data + power input
– Complies with IEEE 802.3bt PoE++ Type 4 standard PD
– Compatible with PoH (Power over HDBASE-T) protocol
– Backward compatible with IEEE 802.3at PoE+ end-span or
mid-span PD
– Supports PoE input power up to 95 watts
• 2-port data + power output
– Complies with IEEE 802.3bt Power over Ethernet Plus Plus
Type 3 PSE standard
– Up to 2 IEEE 802.3at/802.3bt PoE devices powered
– Supports total PoE budget up to 65 watts for 2 PoE output
ports
– Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device
Layer 2 Features
• Hardware-based 10/100Mbps, half / full duplex and 1000Mbps
fullduplexmode,owcontrol,auto-negotiationandautoMDI/
MDI-X
• FeaturesStore-and-Forwardmodewithwire-speedltering
and forwarding rates
• IEEE802.3xowcontrolforfullduplexoperationandback
pressure for half duplex operation
• Integrates address look-up engine, supporting 2K absolute
MAC addresses
• 9K jumbo frame support in 1000Mbps duplex mode
• Automatic address learning and address aging
Industrial Case and Installation
• IP67-rated aluminum case
• Wall-mount design
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• No external power cable required for installation
• Plug and Play installation
Industrial IP67 1-Port 802.3bt PoE++ to
2-Port 802.3at/bt PoE++ Extender
Weather-proof RJ45 Ethernet Connector and Shielded Plug
The IPOE-E302 is ideal for installing an extended range of outdoor PoE devices
such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor
PoE IP intercoms and much more. The IPOE-E302 is equipped with 3-port
10/100/1000BASE-T auto-negotiation RJ45 connectors and 3 waterproof cable
glands for direct-attach applications. Assembled with waterproof cable gland, it can
make the general RJ45 connector weather-proof and provides tight and strong
connection, and ensures it comes with the industrial protection rating of IP67
capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold.
Environmentally-hardened Design
With industrial-level IP67-rated aluminum case, the IPOE-E302 provides a high
level of immunity against electromagnetic interference, and is able to protect itself
from dust and water ingress and to operate under the temperature range from -40
to 75 degrees C. All these features ensure the highest level of reliability for mission-
criticalapplicationsinanydifcultenvironment.