Datasheet

ManualsBrandsPLANET Technology ManualsPOE ExtendersIndustrial 1-Port 802.3at PoE+ to 2-Port 802.3at/af PoE Extender

IPOE-E202

Industrial IP63-rated 1-Port 802.3at PoE+ to 2-Port

802.3af PoE Extender

PoE Solution for Breaking RJ45 100m Limitation

PLANET IPOE-E202 is an industrial IP63-rated 1-port PoE+ to 2-port 802.3af/at

Gigabit PoE Extender designed especially for point to multipoint PoE application. The

IPOE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and

supplies a maximum of 25-watt PoE power budget for 2 PoE output ports, extending

both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the

UTP cable. The IPOE-E202 provides a simple solution for adding PoE ports without

running more cabling and achieves more flexible network applications without requiring

an external power adapter.

Physical Port

• 3 10/100/1000BASE-T Gigabit RJ45 interfaces

–

1-port data + power input

–

2-port data + power output

Power over Ethernet

• 1-port data + power input

–

Complies with IEEE 802.3at Power over Ethernet Plus end-

span/mid-span PD

–

Supports PoE input power up to 30.8 watts

• 2-port data + power output

–

Complies with IEEE 802.3af/802.3at Power over Ethernet/

end-span PSE

–

Up to 2 IEEE 802.3af/802.3at devices powered

–

Supports PoE power up to 25 watts for each PoE port

–

Auto detects powered device (PD)

• Extends the range of PoE to an additional 100 meters (328ft.)

• Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

• Hardware based 10/100Mbps, half/full duplex and 1000Mbps

fullduplexmode,owcontrol,auto-negotiationandautoMDI/

MDI-X

• FeaturesStore-and-Forwardmodewithwire-speedlteringand

forwarding rates

• IEEE802.3xowcontrolforfullduplexoperationandback

pressure for half duplex operation

• Integrates address look-up engine, supporting 2K absolute MAC

addresses

• 9K jumbo frame support in 1000Mbps duplex mode

• Automatic address learning and address aging

• Supports CSMA/CD protocol

Industrial Case and Installation

• IP63-rated aluminum case

• Wall-mount design

• Waterproof and dustproof

• Supports EFT protection of 2000 VDC for power line

• Supports 2000 VDC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

• No external power cable required for installation

• Plug and Play installation

Standard Compliance

• IEEE 802.3 10BASE-T

• IEEE 802.3u 100BASE-TX

• IEEE 802.3ab 1000BASE-T

• IEEE 802.3x Flow Control

• IEEE 802.3at Power over Ethernet Plus

• IEEE 802.3af Power over Ethernet

• FCC Part 15 Class A, CE

PoE Dome IP Camera

PoE+/30W

IEEE 802.3af/12W

Power

Data

100m

IEEE 802.3af/12W

100m

PoE PTZ IP Camera

PoE+/30W

IEEE 802.3at/25W

25W

12W+12W

Power

Data

100m

PoE Injector/Switch

PoE Extender

PoE Injector/Switch

100m

1 In 1 Out

1 In 2 Out

Summary of content (5 pages)

PAGE 1
IPOE-E202 Industrial IP63-rated 1-Port 802.3at PoE+ to 2-Port 802.3af PoE Extender Physical Port • 3 10/100/1000BASE-T Gigabit RJ45 interfaces –– 1-port data + power input –– 2-port data + power output Power over Ethernet • 1-port data + power input –– Complies with IEEE 802.3at Power over Ethernet Plus endspan/mid-span PD –– Supports PoE input power up to 30.8 watts • 2-port data + power output –– Complies with IEEE 802.3af/802.3at Power over Ethernet/ end-span PSE –– Up to 2 IEEE 802.3af/802.
PAGE 2
IPOE-E202 Weather-proof RJ45 Ethernet Connector and Shielded Plug The IPOE-E202 is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and much more. The IPOE-E202 is equipped with 3-port 10/100/1000BASE-T auto-negotiation weather-proof RJ45 connectors and 3 shielded RJ45 plugs for direct attach applications. These shielded RJ45 plugs can make the general UTP cable weather-proof.
PAGE 3
IPOE-E202 Plug and Play, and Easy Cabling Installation The IPOE-E202 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD). The IPOE-E202 injects power to the PD without affecting the data transmission performance. The IPOE-E202 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters.
PAGE 4
IPOE-E202 Specifications Model IPOE-E202 Hardware Specifications Hardware Version 2 Network Connector PoE In Port 1 x 10/100/1000BASE-T Ethernet with 802.3at PoE+ “Data + Power” in, auto MDI/MDI-X, auto-negotiation RJ45 connector PoE Out Port 2 x 10/100/1000BASE-T Ethernet with IEEE 802.
PAGE 5
IPOE-E202 Three View Diagram IPOE-E202 PWR LNK/ACT 10/100/1000T 1000 Budget Alert PoE IN PoE 1 Out PoE 2 Out LNK ACT PoE In-use Ordering Information IPOE-E202 Industrial 1-Port 802.3at PoE+ to 2-Port 802.3af PoE Extender Related Products IGS-604HPT-RJ Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IPOE-E174 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender POE-E201 IEEE 802.