User's Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
4. Power over Ethernet Budget
The following table lists how many PoE devices can be powered by
the IPOE-E174 under 1m distance:
Power Source
PoE Output
Budget*
Max. Number of PDs supported
95W PoH PSE 75 watts max.
Class 4 PD@25 watts 3 units
Class 3 PD@12.9 watts 4 units
Class 2 PD@7 watts 4 units
90W 802.3bt
PoE++ Type
4 PSE
75 watts max.
Class 4 PD@25 watts 3 units
Class 3 PD@12.9 watts 4 units
Class 2 PD@7 watts 4 units
60W 802.3bt
PoE++ Type
3 PSE
50 watts max.
Class 4 PD@25 watts 2 units
Class 3 PD@12.9 watts 3 units
Class 2 PD@7 watts 4 units
30W 802.3at
PoE+ PSE
25 watts max.
Class 3 PD@12.9 watts 1 units
Class 2 PD@7 watts 3 units
Remarks:
1. The PoE output budget means the aggregated power output of
the 4 PSE ports.
2. The aggregated power consumption will be below 60 watts if with
PoE+ PSE.
3. Please check the power input LED for optimal power output.
Dimensions
(W x D x H)
32 x 87.8 x 135 mm
Weignt 430g
Power
Consumption
5.6 watts/19.11 BTU (Power On)
6.5 watts/22.18 BTU (Full loading without
PoE function)
82.3 watts/280.82 BTU (Full loading with
PoE function)
Power over Ethernet
PoE Standard
PoE in Port
- IEEE 802.3bt PoE++ Type 4 standard PD
- PoH (Power over HDBASE-T)
- IEEE 802.3at PoE+ end-span/mid-span
PD
Per PoE Out Port
IEEE 802.3at Power over Ethernet Plus
end-span PSE
PoE Power
PoE in Port
50~57V DC, max. 95 watts
Per PoE Out Port
44~55V DC, max. 30.8 watts
Power Pin
Assignment
PoE in Port
1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+),
3/6(-), 4/5(+), 7/8(-)
Per PoE out Port
1/2(+), 3/6(-)
5.TechnicalSpecications
Model IPOE-E174
Hardware Specications
Network Connector
PoE In Port
- 1 x 10/100/1000BASE-T Ethernet with
802.3bt PoE++ “Data + DC” in
- Auto MDI/MDI-X, auto-negotiation RJ45
connector
PoE Out Port
- 4 x 10/100/1000BASE-T Ethernet with
IEEE 802.3af/at PoE “Data + DC” out
- Auto MDI/MDI-X, auto-negotiation RJ45
connector
Switch Architecture Store-and-Forward switch architecture
MAC Address Table
2K MAC address table with auto learning
function
Switch Fabric 10Gbps
Switch Throughput 7.44Mpps @ 64Bytes
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 9Kbytes
ESD Protection
Air 8KV DC
Contact 6KV DC
Surge Protection 6KV
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
PoE Power Budget
75 watts (max.) @ 802.3bt PoE++ Type 4
input
60 watts (max.) @ 802.3bt PoE++ Type 3
input
75 watts (max.) @ PoH input
25 watts (max.) @ 802.3at PoE+ input
Standards Conformance
Regulatory
Compliance
FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 free fall
IEC60068-2-27 shock
IEC60068-2-6 vibration
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Environment
Operating
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-
condensing)
Storage
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-
condensing)
6. Physical Dimensions
The IPOE-E174’s dimensions (W x D x H) are 32 x 87.8 x 135 mm.
32.00
135.00
87.80
97.10
28.00
18.00
18.00
28.00
18.00
28.00
Top View
Side View Front View
Mounting Kit Mounting Kit
DIN-Rail Kit
Side View
Rear View
Unit: mm
Bottom View
ACT
LNK PoE IN
PoE Power Usage
60W40W20W
60W30W 90W
Industrial 4-Port PoE Extender
PoE Input
1 2 3 4
AC
T
LNK
PoE- in-Use
Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource and user’s manual on PLANET Web site rst
to check if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Switch support team mail address:
[e-mail]
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.