Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial Power over EthernetIndustrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender

Data Sheet

IPOE-E174

Industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at

Gigabit PoE Extender

PoE Solution for Long-reach Distance

PLANET IPOE-E174 is an industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at

Gigabit PoE Extender designed especially for the point to multipoint PoE application.

The IPOE-E174 can obtain a maximum of 95-watt PoE power from 802.3bt PoE++

input port and supplies a maximum of 75-watt PoE power budget for 4 PoE output

ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at Power

over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to 200m

where up to 4 powered devices (PDs) can be powered at the same time. The

IPOE-E174 provides a simple solution for adding PoE ports without running more

cabling and achieves more exible network applications without requiring an external

power adapter.

Physical Port

• Five 10/100/1000BASE-T Gigabit RJ45 interfaces

– 1-port data + power input

– 4-port data + power output

Power over Ethernet

• 1-port data + power input

– Complies with 802.3bt Power over Ethernet Plus Plus

end-span and mid-span PD

– Complies with IEEE 802.3at Power over Ethernet Plus

end-span/mid-span PD

– Supports PoE input power up to 95 watts

• 4-port data + power output

– Complies with IEEE 802.3af/at PoE/end-span PSE

– Up to 4 IEEE 802.3af/at devices powered

– Supports PoE power up to 30 watts for each PoE port

– Auto detects powered device (PD)

• Extends the range of PoE to an additional 100 meters

(328ft.)

• Forwards both Ethernet data and PoE power to remote

device

Layer 2 Features

• Features Store-and-Forward mode with wire-speed ltering

and forwarding rates

• Integrates address look-up engine, supporting 2K absolute

MAC addresses

• 9K jumbo frame support in 1000Mbps duplex mode

• Automatic address learning and address aging

Industrial Case and Installation

• IP30 metal case

• DIN-rail and wall-mount designs

• Supports 6000V DC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

• No external power cable required for installation

• Plug and Play installation

802.3bt PoE++

(95W)

IEEE 802.3at PoE+

(25W)

IEEE 802.3at PoE+

(25W)

PoE PTZ IP Camera

PoE Dome IP Camera

802.3bt PoE++

(95W)

IEEE 802.3at

PoE+

(15W)

IEEE 802.3at

PoE+

(15W)

IEEE 802.3at

PoE+

(15W)

IEEE 802.3at

PoE+

(15W)

Industrial

Switch

Power

Supply

Data

Power

DC Input

Industrial

Switch

Power

Supply

Data

Power

DC Input

Summary of content (5 pages)

PAGE 1
IPOE-E174 Industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender Physical Port • Five 10/100/1000BASE-T Gigabit RJ45 interfaces –– 1-port data + power input –– 4-port data + power output Power over Ethernet • 1-port data + power input –– Complies with 802.3bt Power over Ethernet Plus Plus end-span and mid-span PD –– Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD PoE Solution for Long-reach Distance PLANET IPOE-E174 is an industrial 1-Port 802.
PAGE 2
IPOE-E174 Environmentally-hardened Design With industrial-grade IP30 metal case, the IPOE-E174 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-E174 can be placed in almost any difficult environment.
PAGE 3
IPOE-E174 Applications One Power Source for Multi Powered Devices Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance where IP cameras are installed in a remote location, PLANET IPOE-E174 is very useful for expanding the network already set up without worrying about the cabling distance limitation. In contrast, the conventional networking does not have the flexibility of network expansion.
PAGE 4
IPOE-E174 Product Specifications Model IPOE-E174 Hardware Specifications Data Rate 10/100/1000Mbps PoE In Port - 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in Network Connector - Auto MDI/MDI-X, auto-negotiation RJ45 connector PoE Out Port - 4 x 10/100/1000BASE-T Ethernet with IEEE 802.
PAGE 5
IPOE-E174 Dimensions Top View Mounting Kit Front View 28.00 18.00 Side View Rear View Side View 40.00 28.00 30W 60W 90W PoE Input 46.50 53.50 PoE IN DIN-Rail Kit PoE Power Usage 20W 40W 60W 1 48.80 48.80 135.00 Industrial 4-Port PoE Extender LNK ACT 53.50 2 28.00 3 39.70 LNK ACT 4 PoEin-Use 40.00 28.00 18.00 87.80 32.00 18.00 28.00 97.10 Bottom View Mounting Kit Unit: mm Ordering Information IPOE-E174 1-Port 802.3bt PoE++ to 4-Port 802.