Datasheet
IPOE-270 Series
6
IEEE 802.3bt PoE++ Injector and 802.3bt PoE++ Splitter Installation
For a place which is hard to find the power inlet, the IPOE-270 series and IPOE-173S can operate as a pair to provide the easiest way to power your
Ethernetdeviceswhichneedhighpowerinput,suchasPTZ(pan,tilt&zoom)IPcameras,colortouch-screenvoiceoverIP(VoIP)telephones,andmulti-
channelwirelessLANaccesspointsinstalledonthetopofthebuildingorinenterpriseofceorhome,aswellasthinclients,all-in-onetouchPCs,pointof
sale (POS), information kiosks and remote digital signage displays.
IEEE 802.3bt PoE++ Injector and 802.3at PoE+ Network Extension Installation
Is100-metercablelongenoughforawiderangeofIPsurveillancedeployments?Theansweriscertainlynot.ToachievethebenetsofIPsurveillanceand
also the long-distance IP camera distribution, the IPOE-270 series and PLANET IPOE-E302 PoE Extender can be a quick and cost-effective option. In the
simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the IPOE-270 series. The IPOE-270 series
delivers PoE power over the first 100 meters to the PoE Extender over UTP cables, and then the PoE Extender forwards the Ethernet data and remaining
PoE power to the remote PoE IP cameras.
Data
Data
Power
Supply
Power
DC Input
DC
-40
℃
75
℃
Power
Data
DC
Power Line (DC)
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Industrial 802.3bt
PoE++ Splitter
Industrial 802.3bt
PoE++ Splitter
Power
12V/24V DC Output
Data
PoE
Power
Data
PoE
DC
Power
Data
DC
POS System
Digital Signage
IPOE-270 Series
Industrial
Gigabit Switch
50 meters 50 meters
PoE+ Wireless AP
PoE+ IP Camera
PoE+ VOIP Phome
PoE+ Door Phone
IPOE-270 Series
Power
Supply
Data
Data
Power
DC Input
DC
-40
℃
75
℃
100 meters 100 meters
DC
Power Line (DC)
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Industrial 802.3bt
PoE++ Extender
Industrial 802.3bt
PoE++ Extender
Power
Data
PoE
Power
Data
PoE
Power
Data
PoE
PoE
Industrial
Gigabit Switch
Power
Data
PoE
PoE
Caution
Equipment must
be grounded
PoE In: 802.3at PoE
Don’t turn “A” when
attaching “B”
Surge arrester is required and
must be grounded
The proper antenna must be
connected before powering
the AP on
1
2
A
B