Datasheet

IPOE-175
4
Product Specications
Product
IPOE-175
Hardware Specications
Interface
Input Port 1 x 10/100/1000BASE-T “Data” in RJ45 port
Output Port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3bt PoE+
“Data + DC” out RJ45 port
Input Power Terminal Block
1 x 2-pin terminal block
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
Data Rate 10/100/1000Mbps
LED Indicators
PWR (Green)
PoE-in-use x 1 (Amber)
Input Voltage 24~56V DC
PowConsumption
Voltage System on Full Load (Max.)
DC 24V 1.2W 72W
DC 36V 1.44W 70.56W
DC 54V 1.71W 65.8W
DC 56V 2.24W 62.1W
ESD Protection
Air 8KV DC
Contact 6KV DC
Surge Protection 6KV
Enclosure IP67-rated and IK10 aluminum metal case
Installation Wall-mount ear
Dimensions (W x D x H)
150 x 43.8 x 72.94 mm
169.85 x 43.8 x 72.94 mm, with cable gland
Weight
339g
373g (with three waterproof cable glands)
MTBF >100,000 hours
Network Cable
10BASE-T: UTP category 3, 5 cable (≤100m)
100BASE-TX: UTP category 5,5e cable (≤100m)
1000BASE-T: UTP category 5e,6 cable(≤100m)
Power over Ethernet
PoE Standard
IEEE 802.3bt PoE++ type 3 PSE
Backward compatible with IEEE 802.3at PoE+
PoE Power Supply Type
802.3bt/PoH (Power over HDBaseT)
End-span/Mid-span
PoE Power Output
55V DC
Max. 60 watts to 802.3bt PoE++ PD
Max. 60 watts to PoH PD
Max. 30 watts to 802.3at PoE+ PD
Power Pin Assignment
802.3bt/PoH: 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-)
End-span: 1/2 (-), 3/6 (+)
Mid-span: 4/5 (+), 7/8 (-)
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A
CE
Stability Testing
IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
Standards Conformances
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)