User's Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Power
Consumption
System on with
PoE input
5.4 watts
Full loading with
maximum
12V DC, 5.8A
output
81.6 watts
Power
Output
802.3 bt type 3
PoE++ input
12V DC, 4.5A (max.)
24V DC, 2.2A (max.)
802.3 bt type 4
PoE++ input
12V DC, 5.8A (max.)
24V DC, 2.9A (max.)
Network
Cable
802.3 bt PoE++
input
(60W+)
4-pair UTP Cat. 5e, 6, up to 100m
(328ft)
802.3at PoE+
input
(30W)
2-pair UTP Cat. 5, 5e, 6, up to
100m (328ft)
Power over Ethernet
PoE Standard
802.3 bt PoE++
4-pair 802.3at PoE+
Power Output DC 12V/24V by DIP switch control
PoE Power Supply Type
End-span + Mid-span
End-span
Mid-span
Power Pin Assignment
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
or 1/2 (-), 3/6 (+); 4/5 (+), 7/8
(-)
5. Physical Dimensions
Dimensions (W x D x H): 32 x 87.8 x 135 mm
32.00
135.00
87.80
97.10
48.80
18.0028.00
28.00
40.00
Top View
Side View Front View
Mounting Kit
Mounting Kit
DIN-Rail Kit
Side View
Rear View
Unit: mm
Bottom View
PoE IN
10/100/1000T
10/100/1000T
Power Output
V+
V+
Data Out
12V
12V 24V
DC Voltage
24V
30W 60W 90W
Industrial 802.3bt PoE++ Splitter
PoE Input
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast
Ethernet
IEEE 802.3ab 1000BASE-T Gigabit
Ethernet
IEEE 802.3at Power over Ethernet
Plus
IEEE 802.3bt 4-pair Power over
Ethernet Type 4
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature -40~ 75 degrees C
Storage Temperature -40~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
6. Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource at PLANET web site rst to check if it could
solve your issue. If you need more support information, please
contact PLANET support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq?method=category&c1=2
Support team mail address:
support@planet.com.tw
Copyright © PLANET Technology Corp. 2019.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
FCC Warning
This device has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the Instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
WEEE Warning
To avoid the potential eects on the environment and
human health as a result of the presence of hazardous
substances in electrical and electronic equipment, end
users of electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin symbol. Do
not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan Tel:886-2-2219-9518 Fax:886-2-2219-9528
EC Declaration of Conformity
For the following equipment:
*Type of Product : Industrial Single-Port 10/100/1000Mbps 802.3bt PoE++ Splitter
*Model Number : IPOE-173S
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive on
2014/30/EU.
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 2015+AC:2016, Class A
EN 55024 2010+A1:2015
EN 55035 2017
Responsible for marking this declaration if the:
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
Person responsible for making this declaration
Name, Surname Jonas Yang
Position / Title : Director
Taiwan
15
th
Nov., 2019
.
Place
Date
Legal Signature