User's Manual

Step 2: Tighten the wire-clamp screws for preventing the wires from

loosening.

1 2 3 4 5 6

Power 1 Alarm Power 2

+ - + -

Figure 6: PWR1 & PWR2 Pins of Terminal Block.

Note

1. The wire gauge for the terminal block should be in the

range between 12 ~ 24 AWG.

2. As the DC input connector of the IPOE-171 series is

polarity protected, connecting Positive/Negative DC

power wires to the wrong pins will not damage the unit.