Datasheet

IPOE-162S
4
Specications
Model
IPOE-162
Camera
Interface
“PoE (Power + Data)” Input Port : 1 x RJ-45 10/100/1000Base-T
“Data” Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block
LED Indicator System: Power Ready x 1 (Green)
Network Cable
10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6
Distance up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)
Data Rate
10/100/1000Mbps
(vary on Ethernet device attached)
DIP Switch 12V DC / 24V DC output voltage
Power Input 802.3at PoE 48~56V DC
Power Output 12V / 24V DC, max 2A (adjustable)
Dimensions (W x D x H) 135 x 87.8 x 32 mm
Weight 421g
Enclosure IP30 metal case
Installation DIN rail kit and wall mount ear
ESD / EFT Protection 6KV DC
Power over Ethernet
PoE Standard IEEE 802.3at High Power over Ethernet
Number of devices that can be powered
1 or 2
(Vary on device’s power requirement; DC1 + DC2 cannot be over 25 watts.)
Standards Conformance
Standards Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3at High Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32(Free Fall)
IEC60068-2-27(Shock)
IEC60068-2-6(Vibration)
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity
5 ~ 95% (non-condensing)