Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial EthernetIndustrial IEEE 802.3at Gigabit High Power over Ethernet Splitter

Data Sheet

IPOE-162S

Industrial IEEE 802.3at Gigabit High Power over

Ethernet Splitter

The Best Industrial Grade Data Link and Power Sourcing for Non-PoE

Solution

Planet IPOE-162S is an Industrial High Power PoE Splitter that can split the 48~56V

DC over the existing Ethernet cable into the selectable 12V or 24V DC power output. It

supports passive 10/100/1000Mbps Ethernet connection ability and complies with IEEE

802.3at High Power over Ethernet standard that supports up to 25-watt output power to

powered device. To fulll the growing industrial applications, the IPOE-162S is designed

to work under the operating temperature range from -40 to 75 degrees C (-40 to 167

degrees F). The IPOE-162S is an ideal solution to transferring power to traditional

network device with high power demand directly without the need to install additional

power outlets and electrical cabling in the industrial environment.

Innovative, Selectable DC Power Output Voltage

Via the innovative 12 volt / 24 volt DIP switch on the front panel, the IPOE-162S can

supply either 24V DC power to industrial equipment or 12V DC output to the common

network devices, such as wireless access point or IP camera. It highly increases the

exibility of the product applications.

Dual Power Output Capability

By supporting up to 25-watt 802.3at Power over Ethernet cable, the IPOE-162S can

satisfy not only single power-hungry equipment but also able to share the 25-watt output

power to two non-PoE Ethernet devices simultaneously through a 4-pin terminal block.

For example, the two power output can be applied as shown below to completely solve

the need of electric source:

■ IP camera (Power 1) + Outdoor housing with fan and heater (Power 2)

■ IP camera (Power 1) + Pan & Tilt motor (Power 2)

■ Analog camera (Power 1) + IP video server (Power 2)

Interface

• 2-port RJ-45 interfaces

–

1-port PoE Power+ Data input

–

1-port Data output

–

2 DC out (4-pin Terminal Block)

Power over Ethernet Splitter

• Complies with IEEE 802.3at High Power over Ethernet,

• Splits the 48~56V DC power over RJ-45 Ethernet cable

into DC 12V / 24V output

• Auto-detects IEEE 802.3at PoE equipment, protecting

devices from being damaged by incorrect installation

• Two different adjustable output voltage options (12V /

2A, 24V / 1A) to t various devices

• Distance up to 100 meters

Industrial Case / Installation

• IP30 metal case protection

• DIN rail and wall mount design

• Supports EFT 6000V DC protection for power line

• Supports 6000V DC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

Standard Compliance

• IEEE 802.3 10Base-T

• IEEE 802.3u 100Base-TX

• IEEE 802.3ab 1000Base-T

• IEEE 802.3at High Power over Ethernet standard

• FCC Part 15 Class A, CE

Summary of content (5 pages)

PAGE 1
IPOE-162S Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter Interface • 2-port RJ-45 interfaces –– 1-port PoE Power+ Data input –– 1-port Data output –– 2 DC out (4-pin Terminal Block) Power over Ethernet Splitter • Complies with IEEE 802.
PAGE 2
IPOE-162S Powered Device 1 Maximum Output 25 Watts Powered Device 1 Total Maximum Output 25 Watts Powered Device 2 100 meters IEEE 802.3at Injector PoE ICA-HM351 Data + DC Power RJ-45 Data 12V DC for Camera 12V DC for Fan & Heater IP Camera with Fan, Heater IPOE-162S 802.3at PoE Splitter Environmentally Hardened Design With compact, slim type IP30 industrial case protection, the space saving Industrial High Power PoE Splitter IPOE-162S can be placed in almost any difficult environment.
PAGE 3
IPOE-162S Plug and Play, Easy Cabling Installation With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, connecting through the Industrial High Power PoE Injector with the IPOE-162S, you can also have benefits including cost saving, easy networking planning and high network reliability. Applications IEEE 802.
PAGE 4
IPOE-162S Specifications Model IPOE-162 Camera Interface “PoE (Power + Data)” Input Port : 1 x RJ-45 10/100/1000Base-T “Data” Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator System: Power Ready x 1 (Green) Network Cable 10/100/1000Base-T: 4-Pair UTP Cat.
PAGE 5
IPOE-162S Dimensions IPOE-162S: Side View Bottom View Front View Top View Rear View Mounting Kit DIN-Rail Kit Mounting Kit Dimensions ( unit = mm ) Ordering Information IPOE-162S Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter Related Products IGTP-80xT Series 1000Base-SX / LX to 10/100/1000Base-T 802.3at PoE Industrial Media Converter POE-161 IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-Span) IPOE-162 Industrial IEEE 802.