Datasheet

4
IPOE-162
Specications
Product
IPOE-162
HardwareSpecications
Interface
Input Port 1 x RJ45 STP (Data In)
Output Port 1 x RJ45 STP (Data + Power Out)
Input Power Terminal Block 1
LED Indicator
System:
Power 1 (Green),
Power 2 (Green),
Fault (Red)
PoE Port:
PoE-in-use x 1 (Orange)
Switch Throughput@64bytes 13.3Mpps
MAC Address Table 4K entries
Jumbo Frame 9216 bytes
Flow Control IEEE 802.3x pause frame for full duplex; back pressure for half duplex
LED
System: Power (Amber)
10/100/1000T RJ45 Interfaces
PoE-in-Use (Amber)
10/100/1000 LNK / ACT (Green)
Network Cable
10BASE-T: UTP Cat. 3, 4, 5, up to 100m (328ft)
100BASE-TX: UTP Cat. 3, 4, 5, up to 100m (328ft)
1000BASE-T: UTP Cat. 5, 5e, 6 up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)
Data Rate 10/100/1000Mbps
Dimensions (W x D x H) 32 x 87 x 135 mm
Weight 489g
Unit Input Voltage 12 ~ 48V DC
Power Consumption 32 watts max.
Number of devices can be powered 1
Installation DIN-rail kit and wall-mount ear
Alarm Provides one relay output for power failure; alarm relay current carry ability: 3A @ DC 24V
Enclosure IP30 slim metal case
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus / mid-span PSE
PoE Power Output 30 watts
PoE Power Supply Type Mid-span
Power Pin Assignment 4/5(+), 7/8(-)
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
Ordering Information
IPOE-162 Industrial IEEE 802.3at Gigabit Power over Ethernet Plus Injector (Mid-span, 30 watts)