User's Manual

IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
- 50 -
Parameters Description
Private Password
For private password, use DES. Select DES type to key-in password.
Parameters Description
sysName
The name displayed on SNMPAgent.
sysContact
The contact displayed on SNMPAgent.
sysLocation
The location displayed on SNMPAgent.
Parameters Description
Host
The Host IP address of SNMP Trap.
SNMP Trap Port The phase connects to SNMP Trap. Default is 162.
Authentication
String
The authentication string to access SNMP Trap.
SNMP Test
After setting up the above info, you can send a test mail to make sure
this function is normal.
4.3.5 Syslog
Remote Power Manager will send out text message to syslog receiver (syslog server). Please do as
follows: