User's Manual

IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
- 36 -
Parameters Description
than “Low Alarm” setting.
Non-Monitor Alert: “Offline Monitor” is not checked. And
external temperature is higher than “High Alarm” or lower
than “Low Alarm” setting.
Non-Monitor Off-line: “Offline Monitor” is not checked.
Temperature Probe is not connected to device now.
Move the mouse over the icons for its detailed information, and the
menu is displayed as follows:
Temperature
Refer to the temperature value detected by the current temperature
sensor.
State dropdown
menu
This drop-down list offers four states for inquiry: "All", "Abnormal",
"Alert", and "Normal" that will be displayed as per the temperature
sensor state.
Setup
Name: Temperature sensor name
High Alarm: Set up the values of high temp alarm. When temp is
higher than you set, the alarm will occur.
Low Alarm: Set up the values of low temp alarm. When temp is
lower than you set, the alarm will occur.
Offline Monitor: Check to enable to monitor system. When temp is
higher than you set, device will send alerts via email.
Device Temp
Device Temp: Such device temperature.
High Alarm: Set up the values of high temp alarm. When temp is
higher than you set, the alarm will occur.
Low Alarm: Set up the values of low temp alarm. When temp is
lower than you set, the alarm will occur.