User's Manual

IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
- 35 -
Parameters Description
4.1.4 Temperature
Display the information of Offline Monitor, Status and Temperature Value of the sensor.
Parameters Description
Name
Description of temp port.
Offline Monitor
Check to enable to monitor the state of temp sensor. When abnormal
temp occurs, device will send alert via the specified email.
Status
Temperature sensor has 6 states: "Monitor Normal", "Monitor Alert",
"Monitor Off-line, the "Non-monitor Normal" "Non-monitor Alert", and
"Non-monitor Off-line".
Monitor Normal: “Offline Monitor” is checked. And external
temperature is not higher than “High Alarm” or lower than
“Low Alarm” setting.
Monitor Alert: “Offline Monitor” is checked. And external
temperature is higher than “High Alarm” or lower than “Low
Alarm” setting.
Monitor Off-line: “Offline Monitor” is checked. Temperature
Probe is not connected to PDU now.
Non-Monitor Normal: “Offline Monitor” is not checked. And
external temperature is not higher than “High Alarm” or lower