User's Manual

IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
- 20 -
operated through the panel. Please go to the Peripheral of web UI and check the setting.
IPM-8220 IP Panel Operation
Press the Switch button to show words like "IP"  Press the Set button to switch the display of each
IP address. IP can only be set by the web page rather than the LCD panel.
2.2 Product Concatenation
If the controlled device and server have the function of redundant power, then shut-down of the device
requires power-off of both two power supplies. Therefore, product concatenation is provided to reach
the goal of power-on/off at the same time as two power supplies.
1. For concatenation of the two Switched IPM, please pay attention to the following notices: