User's Manual

IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
- 10 -
1.3 Features
 Hardware
■ Desktop/1U rack-mount size design
■ IEC outlet models
■ 4/8 power outlets that support real-time current image monitoring
■ 4/8 LEDs show power status for each power outlet
■ LCD panel displays current, maximum alarm and network information
■ Switch/Set button to lock up protection to avoid modification (For IPM-8220)
■ Buzzer will ring when total power consumption value exceeds set value
■ Circuit breaker can avoid damage that is caused by overload
■ Versatile sensors supported through environmental sensor box (ESB) inputs
 Power Distribution
■ Maximum Amps/Inlet: IEC 16A for 1 inlet
■ Maximum Amps for 4/8 Outlets: IEC 16A for 4/8 outlets
■ Full Frequency Range: 50~60Hz
■ Supports multiple power control methods – Wake on LAN, System After AC Back, Kill the
Power
 Remote Access
■ Remote power control via TCP/IP and a built-in 10/100Mbps Ethernet port
■ Multi browsers support (IE, Google, Firefox, Safari, Opera, Netscape)
 Management
■ Provides Install Wizard to ease users' setting of parameters
■ Events notification by sending pop-up message, trap, SMS or e-mail
■ Supports Management Information Base (MIB) files for SNMP
■ Naming support for outlets
■ Power-on sequencing intelligently turns on/off devices based on event occurrence or
planned schedule
■ Voltage, current, wattage and total kWh report
■ Sets over-current watchdog for power outlet
■ External UPS can be installed for a possible power outage