Quick Guide
– 5 – –6 –
– 7 – – 8 –
3
Press the Set button to show "maximal power outlet current
record", è Hold the Set button for 3 seconds with a long beep to
adjust to a zero point.
4
Hold the Switch button for 3 seconds with a long beep in Port
1~8 mode. è Enter Power On/Off mode ("L" will be added in
front of the original line number). è Double-click the Set button to
switch between power on and off.
L01
IP Panel Operation
Press the Switch button to show words like "IP" è Press the Set
button to switch the display of each IP address. IP can only be set by
the web page rather than the LCD panel.
192 168 001 020IP
4. Utility Installation for Windows
PLANET “IP Search” is a software utility used to search the Switched
IPM product on a network quickly and with ease.
Step 1: Download the Power Packet Utility from PLANET download URL
http://www.planet.com.tw/en/support/download.php?type1=102
&model=48843&type=8184#list
Step 2: Please press the “Refresh” button to nd out your Switched
IPM.
Step 3: Enter the IP address and login to the homepage of Switched
IPM.
5. Further Information
The above steps introduce the simple installation of the Switched IPM.
For further details on the installation of the Switched IP Power Manager,
please refer to the user manual which you can be downloaded from the
PLANET website.
http://www.planet.com.tw/en/support/download.php?type1=102&model=
48843&type=3
If you have further questions, please contact the local dealer or
distributor where you purchased this product or you can contact PLANET
directly at the following email address: support@planet.com.tw
PLANET Technology Corp.
11F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
2011-F10120-000
4
Reset Button
5
RJ45 Ethernet Port
6
USB Connected Port (Future Feature)
7
COM2/1
2 Com Ports provided to enable terminal control, API control and
2 mutual cascading
8
Circuit Breaker Protection
9
Power Inlet
10
Power Outlet
Note: The maximum output current is 16 amps.
11
LCD Panel
To display total current, branch 1, branch 2, voltage and IP
12
Switch Button
Provide LCD panel in order to switch the total current, power
switch control and IP
13
Set Button
Provide LCD panel in order to switch the total current, branch
current, voltage, power switch current, power switch control and
IP; set alarm current
14
Buzzer
15
Alarm Indicating Light
Lights remaining lit: Alarm has occurred
Slow ashing: There was current overloading
16
Power Outlet Indicating Light
Current Panel Operation
When the LCD panel only displays gures and the sign of "A (AMP)", it
means total current. Switch with the Set button to show the following
sequence:
Total Current
Branch 2
Max. Current
Max. Current
Branch 1 Current
Branch 1 Max. Current
Branch 2 Current
Voltage
0.0
A
112
V
0.0
A
0.0
A
0.0
A
0.0
A
0.0
A
1
33
2
11
3
1
LCD menu shows total current, and current values of branch 1 and
branch 2. è Hold the Set button for 3 seconds with a long beep
to enter alarm current setting. è Enter ash mode (LCD will ash
after entering setting mode, "S" and "W" will display at the bottom
of LCD). è Press the Set button to increase the alarm current by
0.5A in each press. è Hold the Set button for 3 seconds with a
"beep" to save the setting.
2
Press the Set button to show the voltage information.
3
Press the Set button to show the maximum current record of all
branch/branch 1/branch 2. è Hold the Set button for 3 seconds
with a long beep to adjust to a zero point.
Power Outlet Panel Operation
When the LCD panel shows gures and "0", the information shown
is the branch circuit power outlet. By clicking the Set button, the
following information will be displayed in sequence:
01 0.0
A
Port 1 Port 1 Current Port 1 Max. Current
0.0
A
1 4
3
2
1
Press the Switch button to Port 1~8 mode.
2
Press the Set button to show power outlet current. è Hold the
Set button for 3 seconds with a long beep to enter power outlet
alarm current setting. è Enter ash mode (LCD will ash after
entering setting mode, "S", "O" and "W" will display at the bottom
of LCD). è Press the Set button to increase the alarm current by
0.5A in each press. è Hold the Set button for 3 seconds with a
"beep" to save the setting.