Quick Guide

ManualsBrandsPLANET Technology ManualsIP KVM Switch17" 8-Port Combo VGA LCD IP KVM Switch

– 1 – – 2 –

– 3 – – 4 –

KVM-210-08M/KVM-210-16M

Quick Installation Guide

17" 8/16-Port

Combo VGA LCD KVM Switch

1. Package Contents

Thank you for choosing PLANET KVM-210-08M/KVM-210-16M

LCD KVM Switch. The KVM Switch provides a useful function

that controls a computing infrastructure that combines multiple

computers with other peripherals.

Open the box of the KVM Switch and carefully unpack it. The

box should contain the following items:

z LCD KVM Switch x 1

z Quick Guide x 1

z KVM Cable x 1

z Power Adapter x 1

z Power Cord x 1

z Rack-mounting Kit x 1

z Stand Kit x 1

z M6 Screw x 12

Note

If there is any item missing or damaged, please

contact the seller immediately.

2. Physical Introduction

8/16-Port Combo KVM Switch

 Control Platform

No. Component Function Description

1 LCD 17" LCD screen

2 Port Select Panel

Switch the Port Number and display

the online port

3 Touchpad Mouse Operation

4 Keyboard Keyboard Operation

5 Slide Rail Single Slide Rail

6 8-/16-port KVM Modular KVM for 8/16 ports

LCD Panel OSD

Buttons

Controls Display Required Quality

 Rear Panel

DC 12V

8 7 6 5 4 3 2 1

16 15 14 13 12 11 10 9

DC 12V

8 7 6 5 4 3 2 1

Interface Description

Power Jack

The input power is 12V DC.

Note

Use the power adapter included

in the package; otherwise, it

may damage the unit and result

in danger.

USB Port

Plug external USB keyboard and mouse into

this port.

Computer Port Install the KVM cable connected to a PC here.

 Port Select Panel

Interface Description

Online

If a corresponding LED number is on, it means

the port is online. Otherwise, the port is off.

Select

The selected port number will display here in

segment display.

RST Detect the PS2/USB signal of port again.

ENT

User can select by pressing the number buttons

and press “ENT” to conrm, then it will switch

to the corresponding port. If that port is ofine

or the wrong number is pressed which is not

included in display scope, there will be no

response, but just keep the present status.

3. Hardware Installation

The LCD KVM provides a standard 19-inch rack for the

installation of devices. Please use the rack installation

accessories attached with the product package. First install the

accessories to the device and then the device to the rack.

Step 1. Screw the front ange to the rack rst. Slide the bars

with the rear ange towards the rack until the anges

make contact with the rack, then screw the rear anges

to the rack.

Summary of content (8 pages)

PAGE 1
2. Physical Introduction Quick Installation Guide 8/16-Port Combo KVM Switch KVM-210-08M/KVM-210-16M  Control Platform 17" 8/16-Port Combo VGA LCD KVM Switch 1 1. Package Contents 7 2 Thank you for choosing PLANET KVM-210-08M/KVM-210-16M LCD KVM Switch. The KVM Switch provides a useful function that controls a computing infrastructure that combines multiple computers with other peripherals. 6 5 Open the box of the KVM Switch and carefully unpack it.
PAGE 2
. Physical Introduction Quick Installation Guide 8/16-Port Combo KVM Switch KVM-210-08M/KVM-210-16M  Control Platform 17" 8/16-Port Combo VGA LCD KVM Switch 1 1. Package Contents 7 2 Thank you for choosing PLANET KVM-210-08M/KVM-210-16M LCD KVM Switch. The KVM Switch provides a useful function that controls a computing infrastructure that combines multiple computers with other peripherals. 6 5 Open the box of the KVM Switch and carefully unpack it.
PAGE 3
2. Physical Introduction Quick Installation Guide 8/16-Port Combo KVM Switch KVM-210-08M/KVM-210-16M  Control Platform 17" 8/16-Port Combo VGA LCD KVM Switch 1 1. Package Contents 7 2 Thank you for choosing PLANET KVM-210-08M/KVM-210-16M LCD KVM Switch. The KVM Switch provides a useful function that controls a computing infrastructure that combines multiple computers with other peripherals. 6 5 Open the box of the KVM Switch and carefully unpack it.
PAGE 4
2. Physical Introduction Quick Installation Guide 8/16-Port Combo KVM Switch KVM-210-08M/KVM-210-16M  Control Platform 17" 8/16-Port Combo VGA LCD KVM Switch 1 1. Package Contents 7 2 Thank you for choosing PLANET KVM-210-08M/KVM-210-16M LCD KVM Switch. The KVM Switch provides a useful function that controls a computing infrastructure that combines multiple computers with other peripherals. 6 5 Open the box of the KVM Switch and carefully unpack it.
PAGE 5
Step 2. Slide the switch onto the support flanges. Use the screws supplied with this package to loosely attach the front of the switch to the front of the rack. Step 4. Use the screws supplied with this package to attach the bars to the rear of the switch. 1 2 Step 5. Connect a PC to a computer port of the KVM, for example port 1. Note 1. You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate your warranty. 2.
PAGE 6
Step 2. Slide the switch onto the support flanges. Use the screws supplied with this package to loosely attach the front of the switch to the front of the rack. Step 4. Use the screws supplied with this package to attach the bars to the rear of the switch. 1 2 Step 5. Connect a PC to a computer port of the KVM, for example port 1. Note 1. You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate your warranty. 2.
PAGE 7
Step 2. Slide the switch onto the support flanges. Use the screws supplied with this package to loosely attach the front of the switch to the front of the rack. Step 4. Use the screws supplied with this package to attach the bars to the rear of the switch. 1 2 Step 5. Connect a PC to a computer port of the KVM, for example port 1. Note 1. You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate your warranty. 2.
PAGE 8
Step 2. Slide the switch onto the support flanges. Use the screws supplied with this package to loosely attach the front of the switch to the front of the rack. Step 4. Use the screws supplied with this package to attach the bars to the rear of the switch. 1 2 Step 5. Connect a PC to a computer port of the KVM, for example port 1. Note 1. You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate your warranty. 2.