User's Manual

Video Wall Ultra 4K HDMI/USB Extender over IP with PoE
IHD-410PT / IHD-410PR
48
4.4.3 Serial over IP
Usually, it is recommended that the Serial over IP function is for engineer to use, but not for end
users. Please do not change the settings.
Description
Function
Enable Serial over IP
If users uncheck this item, then serial 2 can’t be used.
Operation Mode
Type 1 and Type 1 guest modes have to do other commands.
Type 2 (extender transmit) and Type 2 guest mode use telnet through
port 6752.
(Usually, the function is for engineer to use, but not for end users.)
Baud Rate Setting
Set baud rate for the unit.
By default, the baud rate is 115200.