User's Manual

Video Wall Ultra 4K HDMI/USB Extender over IP with PoE
IHD-410PT / IHD-410PR
39
4.2.2 Setup Steps (Examples)
4.2.2.1 1 x 2 video extender
If you want to set a 1 x 2 “video extender” as shown in the following picture, you may refer to the
following table and see the steps below:
OSD
0
1
Vertical Monitor Count
1
1
Horizontal Monitor Count
1
1
Row Position
0
0
Column Position
0
0
4.2.2.2 1 x 2 video wall
If you want to set a 1 x 2 “video wall” as shown in the following picture, you may refer to the following
table and see the steps below:
Step 1
Show OSD: Check this item and all monitors will show their number on the screen.
Step 2
Wall Size and Position Layout: Decide which part of the screen will be applied to a monitor.
OSD
0
1
Vertical Monitor Count
1
1
Horizontal Monitor Count
2
2
Row Position
0
0
Column Position
0
1