User's Manual

Video Wall Ultra 4K HDMI/USB Extender over IP with PoE
IHD-410PT / IHD-410PR
22
Default DIP switch is 0 and the four digits are 0000.
Please refer to the form below. For example, if the position is set to 7, then you’ll see ast-gateway
1110.
DIP Switch
0
1
2
3
4
5
6
7
Four digits
0000
1000
0100
1100
0010
1010
0110
1110
DIP Switch
8
9
A
B
C
D
E
F
Four digits
0001
1001
0101
1101
0011
1011
0111
1111
1. The IP address of transmitter.
2. Ast-client: It represents receiver.
3. The IP address of receiver. Beware, even though the name of receivers are the same, you can tell
the difference by the IP address.
4. You can see the information here.
3.3 Setting TCP/IP on your PC
The default IP address of the IHD-410 series is B class Networking:168.254.xxx.xxx, please set the IP
address of the connected PC as static IP, such as 169.254.xxx.xxx and the sub mask as 255.255.0.0.
Please refer to the following to set the IP address of the connected PC.
3.3.1 Windows XP
If you are using Windows XP, please refer to the steps below:
1. From the desktop, right-click My Network Places > Properties.