IHD-410-Series User Manual

Video Wall Ultra 4K HDMI/USB Extender over IP with PoE
IHD-410PT / IHD-410PR
50
2. You can set VLAN to convert the video source. Please refer to the topology below and imagine
that the concept is based on your issue.
You can set port-based VLAN for the Transmitter (IHD-410PT), and then for the receiver (IHD-
410PR). You can just dynamically swap the receiver port to a different VLAN for video source change.
You can swap VLAN via Web interface of the switch.
Instructions about the topology above:
As for Test A, we set port1 and port3 to a VLAN, and set port2 and port4 to another VLAN. The Rx
will convert the source if we change the connection of Rx and switch from port3 to port4.