Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Copyright Copyright (C) 2017 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Table of Contents Chapter 1. Product Introduction ............................................................................. 6 1.1 Package Contents ............................................................................................................ 6 1.2 Overview .......................................................................................................................... 7 1.3 Features .....................
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.4.2. Serial over IP ....................................................................................................... 48 APPENDIX A. Troubleshooting & Frequently Asked Questions ....................
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following: Media Extender x 1 Quick Installation Guide x 1 IR Emitter Cable with Transmitter x 1 IR Receiver Cable with Receiver x 1 Mounting Bracket x 2 Screws x 4 If any of the above items are missing, please contact your dealer immediately.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 1.2 Overview Ultra High-quality 4K HDMI Video Wall PLANET IHD-410 HDMI/Video Wall over IP with PoE delivers a great 4K video distribution solution such as bringing an efficient and effective advertising deployment. The IHD-410 series is the combination of the transmitter, IHD-410PT, and the receiver, IHD-410PR.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Exclusive Video Transmission by IGMP Snooping Technology One IHD-410PT in local site can drive multiple IHD-410PRs in remote sites without consuming extra network loading. Integrated with PoE switch built-in with IGMP snooping function, there are 64 channels selectable via the IHD-410 series, so video and audio can be transmitted simultaneously.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR with Automatic EDID Copy function, the IHD-410 series allows the system to copy EDID information from EDID compliant displays and assures accurate display performance. Video Channel Setting Matches Well through Network Configuration The IHD-410 series network can be configured by a central computer over the same LAN within a certain distance. Fully leveraging the Gigabit Ethernet switches with 802.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Efficient Control via Selectable 16-Channel DIP Switch Where there is more than one transmitter in the video extend system, the DIP switch in the IHD410PT and IHD-410PR facilitates distinguishing the pair of the transmitter and receiver units in the same channel. It further enables the broadcasting system to perform multiple video extend systems simultaneously through matching of the IHD-410PT and IHD-410PR.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 1.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 1.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Model IHD-410PT IHD-410PR 480i @ 60/50 Hz HDMI Video Out Rotation 0 degrees/180 degrees/270 degrees Compression Visual lossless compression Audio HDMI: 2-ch uncompressed audio General Management Interfaces Web management System Expandability (max.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 1.5 Hardware Interface 1.5.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Receiver: 1.5.2 Interfaces: Receiver (IHD-410PR) Transmitter (IHD-410PT) Interfaces Definition: Position 1 Description Function Ethernet (PoE) Connect to a LAN Switch. IGMP snooping and jumbo frame supported Gigabit IEEE 802.3af/at PoE+ Ethernet switch is recommended. LED: 1. LAN LED (green color): This LED will be flashing while network is accessing via Ethernet. 2.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Position Description Function switch, the LED will be always on. Transmitter: HDMI Type-A female connector for connecting to the HDMI source. Receiver: HDMI Type-A female connector for video output. 2 HDMI 3 Audio In 4 Audio Out 5 DC 12V 12V/2A DC power input. Only use one power source, either from DC or from 802.3af/at PoE+ Ethernet switch.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 1.6 Device Connection Topology PLANET IHD-410PT and IHD-410PR work as a pair to facilitate the management tool and HDMI display over IP Ethernet with PoE. Video Extender The IHD-410PT and IHD-410PR are able to send the same video signal to multi-monitors in different locations at the same time.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Ideal Solution for Wide Variety of Commercial Installation Environments The IHD-410 series supports 100m over single Cat5e/6 cable at point to point, as well as point to many and many to many over Gigabit Ethernet switch. With so many practical features, the IHD-410 series is ideal for live presentations, public broadcasting, education training, boardrooms, etc.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Chapter 2. Hardware Installation 2.1 Devices Requirements 1. Monitor: HDCP compliant monitors with HDMI interface for the HDCP video source. 2. Ethernet cable: Cat5/5e/6 UTP cable (EIA / TIA 568B industry standard compliant). 3. PoE Switch: Please see the recommended PoE switch. 4. PC OS: Windows XP/7/8.1/10.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Chapter 3. Preparation Before getting into the unit’s web UI, user has to find out the device’s IP address and configure PC’s IP address. 3.1 Find the IP Address via Monitor User is able to find the device’s IP address via monitor. Please refer to the steps below: 1. Connect HDMI monitor to the Receiver (IHD-410PR) unit’s HDMI Out interface. 2. Set an identical ID number on DIP switch for all units of the same group. 3.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 3.2 Find the IP Address via Bonjour Browser Software The Bonjour Browser is a free third-party software. User is able to download it from internet. The supported Bonjour Browser version is shown below. The following image is the interface of Bonjour Browser. 1. Click Web Server (HTTP) and theoretically, you can see all the devices connected to the same hub/switch (in the same LAN) that are shown on the right side of the grid. 2.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Default DIP switch is 0 and the four digits are 0000. Please refer to the form below. For example, if the position is set to 7, then you’ll see ast-gateway 1110. DIP Switch Four digits DIP Switch Four digits 0 0000 8 0001 1 1000 9 1001 2 0100 A 0101 3 1100 B 1101 4 0010 C 0011 5 1010 D 1011 6 0110 E 0111 7 1110 F 1111 1. The IP address of transmitter. 2. Ast-client: It represents receiver. 3. The IP address of receiver.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 2. Right-click on the Local Area Connection and select Properties. 3. Select Internet Protocol (TCP/IP) and click Properties.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4. Select "Use the following IP address". IP address: You have to set the same network segment between your PC’s IP address and the transmitter/receiver. For example, if the transmitter’s IP is 169.254.0.1, then you should set your PC’s IP address to 169.254.0.xxx where xxx can be any number between 2 and 253. (Same as receiver) Subnet mask: Enter 255.255.0.0.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 3.3.2 Windows 7 If you are using Windows 7, please refer to the following: 1. Click on the network icon from the right side of the taskbar and then click on “Open Network and Sharing Center”. 2. Click "Change adapter settings".
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 3. Right-click on the Local Area Connection and select Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4).
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 5. Select "Use the following IP address". Select "Use the following IP address". IP address: You have to set the same network segment between your PC’s IP and the transmitter/receiver. For example, if the transmitter’s IP is 169.254.0.1, then you should set to 169.254.0.xxx where xxx can be any number between 2 and 253. (Same as receiver) Subnet mask: Enter 255.255.0.0.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 3.3.3 Windows 10 If you are using Windows 10, please refer to the following: 1. In the search box on the taskbar, type View network connections, and then select View network connections at the top of the list.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 2. Right-click on the Local Area Connection and select Properties. 3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4).
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4. Select "Use the following IP address". Select "Use the following IP address". IP address: You have to set the same network segment between your PC’s IP and the transmitter / receiver. For example, if the transmitter’s IP is 169.254.0.1, then you should set to 169.254.0.xxx where xxx can be any number between 2 and 253. (Same as receiver) Subnet mask: Enter 255.255.0.0.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Chapter 4. Web-based Management Before doing configuration, ensure that all remote displays and all network cables are connected correctly. (Video source is required.) Double-click the device’s name in Bonjour Browser and then get to the Web UI, or you can simply type the device’s IP in the address bar. For example, input http://169.254.xxx.xxx.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.1 System 4.1.1 Version Information Here user can see the current date and the firmware version information. 4.1.2 Update Firmware Here is for user to update firmware. Some functions or issues may have to be improved by updating the firmware. 1. If you want to update firmware for transmitter, please get to transmitter’s Web UI; if you want to update firmware for receiver, please get to the receiver’s Web UI. 2.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.1.3 Utilities User can restore the device to factory default setting, reboot device, reset EDID, even console API command is issued here. Usually, the API command is for engineers to use, but not for end users.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.1.4 Statistics Below is the detailed information on ID, IP, unit status, casting mode, etc.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.2 Video Wall 4.2.1 Basic Setup Click on Video Wall Setup tab for Basic Setup first.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.2.1.1 Bezel and Gap Compensation: OW = Outside Width VW = View Width OH = Outside Height VH = View Height Adjust dimensions (mm) for the monitors of video wall. If you don’t need this, just set all values “OW=VW, OH=VH.” And please note that the unit is 0.1mm and the value must be an integer.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.2.1.2 Wall Size and Position Layout: Step 1 Vertical Monitor Count x Horizontal Monitor Count: If the video wall is 2 x 2, then set up Vertical Monitor Count and Horizontal Monitor Count as 2. (Maximum: 8 x 16) Step 2 Apply To: Select “All” and check the “Apply” button for your settings and all screens will refresh. 4.2.1.3 Configuring row and column position for each display OSD: On-Screen Display.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR User can according to the number do individual control with the corresponding receiver’s IP. Vertical Monitor Count: The number of monitors on vertical line. Horizontal Monitor Count: The number of monitors on horizontal line. Row Position: Set up row position for a monitor.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.2.2 Setup Steps (Examples) 4.2.2.1 1 x 2 video extender If you want to set a 1 x 2 “video extender” as shown in the following picture, you may refer to the following table and see the steps below: OSD Vertical Monitor Count Horizontal Monitor Count Row Position Column Position 0 1 1 0 0 1 1 1 0 0 4.2.2.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Step 3 Apply To: Select one of the clients by the OSD number for configuring the video wall setting one by one. After all settings are done, you can uncheck OSD item. 4.2.2.3 2 x 2 video wall Step 1 Show OSD: Check this item and all monitors will show their number on the screen. Step 2 Wall Size and Position Layout: Decide which part of the screen will be applied to a monitor.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Step 3 Apply To: Select one of the clients by the OSD number for configuring the video wall setting one by one. For video wall application, it is NOT suggested to set up your screen array as N (row) x 1 (column) when horizontal resolution is greater than 1280 pixels. 4.2.3 Advanced Setup After the Basic Setup is done, users may enter this tab for advanced setting.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Step 2: Control Options Description Function Reset to Basic Setup If users make incorrect operations, press “Reset” to restore basic setup. Stretch Type Set up the video output to “Fit In’ or “Stretch Out” mode in the screen. Clockwise Rotate Set up the rotation angle of the video output.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Description Function Screen Layout Set up the number of vertical and horizontal monitor based on the video wall layout. Vertical number 1~8 and horizontal number 1~16. Row Position Set up the row position of monitor, number from 0 to the total number of vertical monitor. Column Position Set up the column position of monitor, number from 0 to the total number of horizontal monitor.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.3 Network User can set the IP mode of each unit here and also can change the casting mode. 4.3.1 IP Setup Description Function Auto IP By default, each device is auto IP mode; the IP is 169.254.xxx.xxx. DHCP IP dispatched from DHCP server. Static Set the IP address manually. 4.3.2 Casting Mode Description Function Multicast Multicast is a true broadcast.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Unicast Unicast is a one-to-one connection between the client and the server. Unicast uses IP delivery methods such as Transmission Control Protocol (TCP) and User Datagram Protocol (UDP), which are sessionbased protocols.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.4 Function Here user can make settings for IHD-410 series. 4.4.1 Video over IP Description Function Enable Video over IP By default, the function is set as enable. If users uncheck this item, then it can’t work. Enable Video Wall By default, the function is set as enable. If users uncheck this item, then video wall function can’t be used.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Description Function Set up the time of stopping the video when detecting video lost. By default, the time is 10 seconds. Timeout for Detecting Video Lost 4.4.2 USB over IP Description Function Enable USB over IP Check it to enable USB extension mode over IP. Operation Mode Including “auto select mode”, “active on line” and “active per request” modes for option.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 4.4.3 Serial over IP Usually, it is recommended that the Serial over IP function is for engineer to use, but not for end users. Please do not change the settings. Description Function Enable Serial over IP If users uncheck this item, then serial 2 can’t be used. Operation Mode Type 1 and Type 1 guest modes have to do other commands. Type 2 (extender transmit) and Type 2 guest mode use telnet through port 6752.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR APPENDIX A. Troubleshooting & Frequently Asked Questions Q1: Where is the Bonjour Browser Software? A: Basically, there are so many third-party search tools that can be used, as long as you can find the IP of the unit. If you want to use Bonjour Browser, please e-mail to us (support@planet.com.tw) and we will provide it to you.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR 2. You can set VLAN to convert the video source. Please refer to the topology below and imagine that the concept is based on your issue. You can set port-based VLAN for the Transmitter (IHD-410PT), and then for the receiver (IHD410PR). You can just dynamically swap the receiver port to a different VLAN for video source change. You can swap VLAN via Web interface of the switch.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR As for Test B, we set port1 and port3 to a VLAN, and the Rx will convert the source if we issue the command via telnet to set port2 and port3 to a VLAN. 3. You also could use HDMI splitter (matrix) to convert the source. As you see, two sources connect to the input of HDMI matrix, and output to Tx, and then Tx and Rx all connect to the switch. In this case, we use the HDMI matrix controller to select the source.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Q10: Why did it fail when upgrading firmware? A: 1. The IHD-410PT has a different firmware from the IHD-410PR. Please choose the correct firmware before upgrading the firmware. 2. Do not interrupt the upgrading procedure. 3. User should upgrade the firmware to every unit. (For example, if there are 3 Rx’s, user should update for 3 times.) Q11: Why can’t I send data via RS232? A: Please check the following: 1.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Q17: How can I connect one video source to two or more Tx ? A: It is recommended to use HDMI splitter with two or more ports. Q18: The output monitor which is connecting to IHD-410PR does not display any video or show wrong color video. How can I fix it? A: The IHD-410PR might not copy correct EDID. Please refer to the following: 1. The output monitor should be a real HDMI monitor; do not use DVI-to-HDMI or any converter.
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT / IHD-410PR Q20: Please specify the traffic bandwidth based on one pair of IHD-410PT and IHD-410PR stream. A: There are too many factors that are able to affect the bandwidth and compression ratio that depends on your video format, resolution, etc.
