High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Copyright Copyright (C) 2017 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Table of Contents Chapter 1. Product Introduction ............................................................................. 5 1.1 Package Contents ............................................................................................................ 5 1.2 Overview .......................................................................................................................... 6 1.3 Features .............................
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following: Media Extender x 1 Quick Installation Guide x 1 IR Emitter Cable with Transmitter x 1 IR Receiver Cable with Receiver x 1 If any of the above items are missing, please contact your dealer immediately.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 1.2 Overview Make Advertising Effective and Easy PLANET IHD-210 HDMI Extender over IP with PoE delivers a great Full-HD video distribution solution such as bringing an efficient and effective advertising deployment. The IHD-210 series is the combination of the transmitter, IHD-210PT, and the receiver, IHD-210PR.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Exclusive Video Transmission by IGMP Snooping Technology One IHD-210PT in local site can drive multiple IHD-210PRs in remote sites without consuming extra network loading. When connected to PoE switch with IGMP snooping function, the IHD-210 series can offer selectable 64 channels, so video and audio can be transmitted simultaneously.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Video Channel Setting Matches Well through Network Configuration The IHD-210 series network can be configured by a central computer over the same LAN within a certain distance. Fully leveraging the mature Ethernet switches with 802.1Q VLAN function, multicasting can be performed to allow more video sources/senders in the network and be remotely managed.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR High-quality Output and Performance The IHD-210 series supports Full HD 1080p, HDCP and blu-ray quality, which have been commonly used for applications that require real-time high video resolution and transmission in long distance. It also includes security and noise immunity as well as HDMI with 2-ch uncompressed audio function to offer the superior video distribution.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 1.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 1.4 Product Specifications Model IHD-210PT IHD-210PR Hardware Specifications Network Interface RJ45 port (10/100BASE-TX Ethernet) x 1 Serial Interface DB-9 female connector for RS232 x 1 Cabling Cat5e/6 UTP cable LED Numerical LED display Buttons Reset button x 1 Video In Interface HDMI A Type female connector N/A x1 Video Out Interface HDMI A Type female connector x 1 IR 3.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR System Expandability (max.) 64 groups Resolution Identification EDID (Extended Display Identification Data) Protocol TCP, UDP, RTSP, RTP, DHCP, IGMP Snooping, Multicast, IPv4 Environment Specifications Operating Temperature: 0~55 degrees C Relative Humidity: 5~90% (non-condensing) Storage Temperature: -10~60 degrees C Relative Humidity: 5~90% (non-condensing) Power Supply IEEE 802.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 1.5 Hardware Interface 1.5.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 1.5.2 Interfaces: Transmitter (IHD-210PT) Receiver (IHD-210PR) Interfaces Definition: Position Description Function 1 DC 5V 5V/2A DC power input. Only use one power source, either from DC or from 802.3af/at PoE+ Ethernet switch. 2 Ethernet (PoE) Connect to a LAN Switch. IGMP snooping and jumbo frame supported Gigabit IEEE 802.3af/at PoE+ Ethernet switch is recommended. LED. 1.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 1.6 Device Connection Topology PLANET IHD-210PT and IHD-210PR work as a pair to facilitate the management tool and HDMI display over IP Ethernet with PoE. Video Extender The IHD-210PT and IHD-210PR are able to send the same video signal to multi-monitors in different locations at the same time.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Ideal Solution for Wide Variety of Commercial Installation Environments The IHD-210 series uses the advanced H.264, which makes it occupy lower bandwidth and play the video more smoothly. It supports 100m over single cat5e/6 cable at point to point, as well as point to many and many to many over Ethernet switch. The video extend solution is ideal for live presentations, public broadcasting, education training, boardrooms, etc.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Chapter 2. Hardware Installation 2.1 Devices Requirements 1. Monitor: HDCP compliant monitors with HDMI interface for the HDCP video source. 2. Ethernet cable: Cat5/5e/6 UTP cable (EIA/TIA 568B industry standard compliant). 3. PoE Switch: Please see the recommended PoE switch. 4. PC OS: Windows XP/7/8.1/10.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Chapter 3. Preparation 3.1 Downloading IPTV Control Center Software When you install the IHD-210 series in a LAN environment, you can execute IPTV Control Center to discover IHD-210 series’ IP address and set up related parameters in the device. Please go to PLANET website and download the IPTV Control Center: http://www.planet.com.tw/en/support/download.php?view=8184&key=IHD-210#list 3.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 2. Right-click on the Local Area Connection and select Properties. 3. Select Internet Protocol (TCP/IP) and click Properties.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 4. Select "Use the following IP address". IP address: You have to set the same network segment between your PC’s IP address and the transmitter/receiver. For example, if the transmitter’s IP is 169.254.0.157, then you should set your PC’s IP address to 169.254.0.xxx where xxx can be any number between 2 and 253. (same as receiver) Subnet mask: Enter 255.255.0.0. Please do not set more than one IP address in the connected PC.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 3.2.2 Windows 7 If you are using Windows 7, please refer to the following: 1. Click on the network icon from the right side of the taskbar and then click on “Open Network and Sharing Center”. 2. Click "Change adapter settings".
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 3. Right-click on the Local Area Connection and select Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4).
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 5. Select "Use the following IP address". Select "Use the following IP address". IP address: You have to set the same network segment between your PC’s IP and the transmitter/receiver. For example, if the transmitter’s IP is 169.254.0.157, then you should set to 169.254.0.xxx where xxx can be any number between 2 and 253. (same as receiver) Subnet mask: Enter 255.255.0.0.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 3.2.3 Windows 10 If you are using Windows 10, please refer to the following: 1. In the search box on the taskbar, type View network connections, and then select View network connections at the top of the list.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 2. Right-click on the Local Area Connection and select Properties. 3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4).
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 4. Select "Use the following IP address". Select "Use the following IP address". IP address: You have to set the same network segment between your PC’s IP and the transmitter / receiver. For example, the transmitter’s IP is 169.254.0.157, then you should set to 169.254.0.xxx where xxx can be any number between 2 and 253. (same as receiver) Subnet mask: Enter 255.255.0.0. Please do not set more than one IP address in the connected PC.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Chapter 4. IPTV Control Center Instructions Before running the IPTV Control Center, please refer to Chapter 3: Preparation to configure the PC’s IP address properly. Then activate the tool “IPTV Control Center.exe” to search and set up. 4.1 System 4.1.1 Search Please run the IPTV Control Center and go to “Device Scan Page”, and then click on “Start Scan” to search for the connected devices.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR The connected devices will be indicated in the “Output Window” area. 1. If IPTV Control Center can’t search any device, please check whether the PC’s IP address is in the same subnet as IHD-210PT and IHD-210PR. 2. IPTV Control Center should be closed and run again when user changes the PC’s IP address. 4.1.2 Go to Tx/Rx Setup Page User is able to configure IHD-210PT on the “Tx Setup page” or configure IHD-210PR on the “Rx Setup page”.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 4.1.3 Tx Setup Page On the “Tx Setup page”, please select the Tx device first by the “Tx Device Selection” and then the relevant setting information of the selected Tx device will be shown in the “Tx Device Info” area. Description Device IP Function Show the selected device’s IP address. Tx Version Show the firmware version. Encoder Version Show the Encoder version.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Description Device IP Function Show the selected device’s IP address. Tx Version Show the firmware version. Encoder Version Show the Encoder version. LAN Status If the device connects to LAN successfully, it will show “Link Up”. Video Lock Lock: The video is transmitting. Unlock: There is no transmitting video. HDCP Down Scale Setup If the transmitting video supports HDCP, it will show “on”.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 4.1.4 Rx Setup Page On the “Rx Setup page”, please select the Rx device first by the “Rx Device Selection” and then the relevant setting information of the selected Rx device will be shown in the “Rx Device Info” area. Description Device IP Rx Version Function Show the selected device’s IP address. Show the firmware version. Tx Device IP If the Rx connects to Tx successfully, it will show the Tx’s IP address.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Description Information Function then the OSD will turn off automatically. 2. Info Display On Mode: The selected RX will always show OSD. 3. Info Display Off Mode: The selected RX will not show OSD. Setting the selected Tx group ID -- The maximum is up to 64 groups from 0 to 63. After changing the setting, please click the update button to make the change effective.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 3. Click on the “…” button to select the correct firmware. Note that the IHD-210PT has a different firmware from the IHD-210PR, please do not upgrade the wrong firmware. 4. Click on “Upgrade Tx/Rx Firmware” to start upgrading firmware procedure. The upgrade progress information will be displayed on the screen. 5. After upgrading firmware, it is recommended to restore the device to default setting.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR The upgrading firmware procedure cannot be interrupted. If the power or network connection is broken during the upgrading firmware procedure, it might possibly cause serious damage to the device. Please be aware that you should not turn off the power during updating the firmware and waiting for the upgrading firmware procedure done. Furthermore, do not try to upgrade new firmware if necessary.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR APPENDIX A. Troubleshooting & Frequently Asked Questions Q1: Where is the IPTV Control Center Software? A: Please go to PLANET website and download it: http://www.planet.com.tw/en/support/download.php?view=8184&key=IHD-210#list Q2: What kind of switch should user use for this product? A: It is recommended to use the switch which supports Gigabit PoE and IGMP snooping function (V2 is fine).
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 2. You can set VLAN to convert the video source, please refer to the topology below and imagine that the concept is based on your issue. You can set up port-based VLAN for the transmitter (IHD-210PT), and then for the receiver (IHD210PR). You can just dynamically swap the receiver port to a different VLAN for video source change. You can swap VLAN via Web interface of the switch.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR just double-click on specified macro, and then the commands will be sent to the switch in a very short time, thus swapping your video source. By the way, in this setting, all the transmitter(s) and receiver should set as the same group. Instructions about the topology above: As for Test A, we set port1 and port3 to a VLAN, and set port2 and port4 to another VLAN.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR Q9: What’s the maximum of Rx units can be linked via one Tx unit? A: Theoretically, 1000 are the most, as long as each Rx unit is assigned to an IP from 65534 IP. Q10: Why did it fail when upgrading firmware? A: 1. The IHD-210PT has a different firmware from the IHD-210PR; please choose the correct firmware before upgrading firmware. 2. Do not interrupt the upgrading procedure. 3. User should upgrade firmware to every unit.
High Definition HDMI Extender over IP with PoE IHD-210PT / IHD-210PR 4. Make them connect to each other. 5. Use the remote controller of video source device to control video source device via IR receiver cable.
