User Manual

- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET industrial 100/1000X to
10/100/1000T 802.3bt PoE++ Media Converter, IGUP-805AT. In the
following section, the term “Industrial PoE++ Media Converter”
means the IGUP-805AT.
Open the box of the Industrial PoE++ Media Converter and
carefully unpack it. The box should contain the following items:
1. Industrial PoE++ Media Converter x 1
2. User’s Manual x 1
3. DIN-rail Kit
4. Wall-mount Kit
5. RJ45 dust cap x 1
6. SFP dust Cap x 1
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original
packing material, and use them again to repack the product in case
there is a need to return it to us for repair.
Power
Consumption
System ON without loading
12V DC: 4.44W
48V DC: 3.36W
Full loading with PoE
12V DC: 82W
48V DC: 98W
DIP Switch 1 LFPP On/O
DIP Switch 2
PoE mode:
ON: Legacy/PoH/Force
OFF: 802.3bt
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
Cables
10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6
(maximum 100 meters)
EIA/TIA-568 100-ohm STP
(maximum 100 meters)
100BASE-FX/1000BASE-SX/LX:
Multi-mode: 50/125μm or 62.5/125μm
optical ber
Single-mode: 9/125μm optical ber
Power Over Ethernet
PoE Standard IEEE 802.3bt Power over Ethernet Plus Plus
PoE Power
Output*
Standard (BT) mode: 90W
Legacy (PoH) mode: 95W
Force mode: 60W
PoE Power
Supply Type
End-span + mid-span
3.2 LEDDenition:
System
LED Color Function
P1 Green
Lights to indicate DC power input 1 has
power.
P2 Green
Lights to indicate DC power input 2 has
power.
Fault Red
Lights/blinks to indicate that DC power or
SFP link has failed.
PoE Usage Amber
IGUP-805AT (30W, 60W, 90W+)
Lights to indicate the system consumes
over 30-/60-/90-watt PoE power budget.
Blinks to indicate the system consumes less
30-/60-/90-watt PoE power budget.
GigabitTPInterface
LED Color Function
TP
LNK/ACT
Green
Lights to indicate that the copper port is
successfully connecting to the network at
10/100/1000Mbps.
Blinks to indicate the copper port is
receiving or sending data.
PoE-in-Use Amber
Lights to indicate that the port is providing
PoE to remote powered device.
O to indicate that the port is not a PoE
powered device (PD).
3.HardwareIntroduction
3.1 Three-ViewDiagram
The three-view diagram of the Industrial PoE++ Media Converter
consists of Ethernet interfaces and one removable 6-pin terminal
block. The LED indicators are also located on the front panel.
32.00
135.00
87.80
97.10
48.8046.50 39.70
28.00
48.80
87.80
53.50 53.50
18.00
15.20
30.00
9.20
18.0028.00
28.00
40.00
Top View
Side View Front View Side View
Mounting Kit
Mounting Kit
DIN-Rail Kit
Unit: mm
Rear View
Bottom View
P1 P2 Fault
30W 60W 90W+
100/1000X
IGUP-805AT
LNK/
ACT
10/100/1000T
802.3bt PoE
++
LNK ACT
PoE-in-Use
Max. fault loading: 24V, 1A
V1+
V2+
PWR1
PWR2Fault
DC Input:
12-56V , 6A max.
DIP
LFPP
PoE
1
2
ON
Enable
Legacy
OFF
Disable
BT
1
2
DIP
ON
Figure1: IGUP-805AT Three-View Diagram
2.ProductSpecications
Model IGUP-805AT
Hardware Specications
Copper Port One 10/100/1000BASE-T port
SFP Slot
One 1000BASE-SX/LX/BX SFP interface
Compatible with 100BASE-FX SFP
Flow Control
Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame
Size
9K
LED
System:
Power 1 (Green), Power 2 (Green), Fault
Alarm (Red)
PoE Usage:
IGUP-805AT: 30W/60W/90W+ (Amber)
Fiber:
100/1000BASE-X: LINK/ACT (Green)
TP:
10/100/1000BASE-T: LNK/ACT (Green)
PoE: PoE-in-Use (Amber)
Dimensions
(W x D x H)
32 x 87 x 135 mm
Weight 484 g
Power
Requirements
12-56V DC, supports reverse polarity
protection
Power Pin
Assignment
End-span: 1/2 (-), 3/6 (+);
mid-span: 4/5 (+), 7/8 (-)
PoE Power
Budget
95 watts@24-56V DC input
60 watts@12V DC input
Standards Conformance
Regulatory
Compliance
FCC Part 15 Class A, CE
Protocols and
Standards
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
IEEE 802.3az Energy Ecient Ethernet (EEE)
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
Temperature
Operating: -40~75 degrees C
Storage: -40~85 degrees C
Humidity
Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)
Note
The maximum PoE power output is 60 watts when the
IGUP-805AT is operating in the Force mode.
FrontView
P1 P2 Fault
30W 60W 90W+
100/1000X
IGUP-805AT
LNK/
ACT
10/100/1000T
802.3bt PoE
++
LNK ACT
PoE-in-Use
Figure2: IGUP-805AT Front View
GigabitFiberInterface
LED Color Function
Fiber
LNK/ACT
Green
Lights to indicate that the ber optic port
is successfully connecting to the network at
100/1000Mbps.
Blinks to indicate the ber optic port is
receiving or sending data.
3.3 WiringthePowerInputs
The 6-contact terminal block connector on the top panel of
Industrial PoE++ Media Converter is used for two 12-56V DC
redundant power inputs. Please follow the steps below to insert the
power wire.
Caution
When performing any of the procedures like inserting
the wires or tightening the wire-clamp screws, make
sure the power is OFF to prevent from getting an
electric shock.
1. Insert positive and negative DC power wires into contacts 1 and
2 for POWER 1, or 5 and 6 for Power 2.
Max. fault loading: 24V, 1A
V1+
V2+
PWR1
PWR2Fault
DC Input:
12-56V , 6A max.
DIP
LFPP
PoE
1
2
ON
Enable
Legacy
OFF
Disable
BT
1
2
DIP
ON
1 2 3 4 5 6

Summary of content (2 pages)