Datasheet

IGUP-805AT
4
Specications
Model
IGUP-805AT
Hardware Specications
Copper Port One 10/100/1000BASE-T port
SFP Slot
One 1000BASE-SX/LX/BX SFP interface
Compatible with 100BASE-FX SFP
Flow Control
Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size 9K
LED Indicators
System:
Power 1 (Green), Power 2 (Green), Fault Alarm (Red)
PoE Usage:
IGUP-805AT: 30W/60W/90W+ (Amber)
Fiber:
100/1000BASE-X: LINK/ACT (Green)
TP:
10/100/1000BASE-T: LNK/ACT (Green)
PoE: PoE-in-Use (Amber)
Dimensions (W x D x H) 32 x 87 x 135 mm
Weight 484 g
Power Requirements 12-56V DC, supports reverse polarity protection
Power Consumption
System ON without loading
12V DC: 4.44W
48V DC: 3.36W
Full loading with PoE
12V DC: 82W
48V DC: 98W
DIP Switch 1 LFPP On/Off
DIP Switch 2 Legacy mode On (POH)/Legacy mode Off (BT)
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
Cables
10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters)
EIA/TIA-568 100-ohm STP (maximum 100 meters)
100BASE-FX/1000BASE-SX/LX:
Multi-mode: 50/125μm or 62.5/125μm optical ber
Single-mode: 9/125μm optical ber
Power Over Ethernet
PoE Standard IEEE 802.3bt Power over Ethernet Plus Plus
PoE Power Output
Standard (BT) mode: 90W
Legacy (POH) mode: 95W
PoE Power Supply Type End-span + Mid-span
Power Pin Assignment
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
PoE Power Budget
95 watts@24-56V DC input
60 watts@12V DC input
PoE Mode
Standard: To provide power to the PD devices that follow the IEEE 802.3at/bt standard.
Legacy: To provide power to the PD devices that do not fully follow the IEEE 802.3af/at/bt standard. Besides, the
Legacy mode supports PoH and Ultra PoE.
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Protocols and Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
IEEE 802.3az Energy Efcient Ethernet (EEE)
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards Compliance
Temperature
Operating: -40~75 degrees C
Storage: -40~85 degrees C
Humidity
Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)