Datasheet
IGUP-805AT
2
Forward mechanism, and also can prevent packet loss with IEEE 802.3x ow control. Furthermore, it can immediately alarm the administrators the issue from the
link media and provide efcient solution to monitor the network power usage.
Plug and Play High Power Sourcing Solution
Complying with the IEEE 802.3bt Power over Ethernet Plus Plus technology, the IGUP-805AT provides up to 95 watts of PoE output power, tripling that of
the earlier 802.3at plus. Through, the Legacy function in the DIP switch design, it is also backward compatible with 802.3af/at PoE standards to allow users
to flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With data and Power over Ethernet from one
unit, the IGUP-805AT can reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.
Door
Phone
Thin
Client
IP Camera
POS
System
Digital
Signage
Health
Care
IP Phone
11ac
Wi-Fi AP
PTZ
Camera
802.3at
30W
802.3at
30W
60~95W60~95W
802.3bt802.3bt
802.3af
15W
802.3af
15W
Lighting
Interactive Network Detection
The IGUP-805AT can support LFPP (Link Fault Passthrough PoE Control) function via its built-in DIP switch. It disables PoE port once it detects the fiber
optic link is down. It can immediately alarm the administrators the issue from the link media and provide efcient solution to monitor the remote network.
PoE
IP Camera
LFPP
Enabled
LFPP
Enabled
Copper Cable
PoE
Copper Cable
Monitoring Center
PoE
IP Camera
Fiber Cable
LFPP
Enabled
LFPP
Enabled
Copper Cable
PoE
Copper Cable
Monitoring Center
Copper
Link Broken
1
Copper and PoE
Link Down
5
LFPP disconnects
Fiber Link
2
LFPP disconnects
Copper Link
4
Fiber Link Down
3
1000
1000
Fiber Cable
Remote Link
Broken
Remote Link
Normal