Datasheet

ManualsBrandsPLANET Technology ManualsDIN-rail Gigabit PoE ConverterIndustrial 1-Port 100/1000X SFP to 1-Port 10/100/1000T 802.3bt PoE++ Media Converter

IGUP-805AT

Industrial 1-Port 100/1000X SFP to 1-Port 10/100/1000T

802.3bt PoE++ Media Converter

PLANET IGUP-805AT Industrial Gigabit Media Converter combines Ethernet media

conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3bt Power over

Ethernet Plus Plus (PoE++) injector function to deliver up to 95 watts of power

output and high data transmission speed to PDs (powered devices) installed in a

remote area where sufficient and reliable power input is required. Its 1000BASE-X

fiber optic uplink port provides long distance, high speed and stable data

transmission to a remote core network. The special and convenient power system

of the IGUP-805AT supports dual 12~56V DC power inputs for power redundancy

and operational exibility.

Being able to operate under the temperature ranging from -40 to 75 degrees C and

with an IP30 rugged case, the IGUP-805AT can be placed in almost any difficult

environment.

Physical Port

• 1-port 10/100/1000BASE-T RJ45 with IEEE 802.3bt PoE

Injector function

• 1 SFP slot, supporting 1000BASE-X and 100BASE-FX

transceiver dual mode

Power over Ethernet

• Complies with IEEE 802.3bt PoE++ Type-4 PSE

• Backward compatible with IEEE 802.3af/at PoE+ standard

• 1 IEEE 802.3af/at/bt device powered

• Supports PoE Power up to 95 watts for PoE port

• Provides DC 55V power over RJ45 Ethernet cable to PD

with Ethernet port

• Auto-detects IEEE 802.3bt equipment and protects devices

from being damaged by incorrect installation

• Remote power feeding up to 100m

• IEEE 802.3af/at/bt splitter devices compatible

Layer 2 Features

• Supports auto-negotiation and 10/100Mbps half / full

duplex and 1000Mbps full duplex mode on RJ45 port

• Prevents packet loss with back pressure (half-duplex) and

IEEE 802.3x pause frame ow control (full-duplex)

Hardware

• LED Indicators

– System: Power 1, Power 2, Fault and PoE usage

– Fiber port: LNK/ACT

– 10/100/1000BASE-T port: LNK/ACT, PoE-in-use

• DIP switch 1: LFPP (Link Fault Passthrough PoE Control)

On/Off

• DIP switch 2: Standard (BT)/Legacy (POH) mode selection

Industrial Case and Installation

• IP30 metal case

• DIN-rail and wall-mount designs

• 12 ~ 56V DC redundant power with reverse polarity

protection and connective removable terminal block for

master and slave power

• Supports 6000 VDC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

Fiber-optic Link Capability Extends the Range of Network Deployment

The maximum distance between a PoE PSE (power sourcing equipment) and PD

via Ethernet cable is 100 meters. To extend the PoE deployment range, the IGUP-

805AT is integrated with ber interface for farther distance applications. The IGUP-

805AT’s ber connector type is as follows:

■ One SFP slot supporting 100BASE-FX/1000BASE-X multi/single mode SFP

module and transmission distance up to 120km (Varying on SFP module)

With the long fiber distance support, the IGUP-805AT still sustains the transmission

performance as high as 1000Mbps. It works in the high-performance Store and

Summary of content (7 pages)

PAGE 1
IGUP-805AT Industrial 1-Port 100/1000X SFP to 1-Port 10/100/1000T 802.3bt PoE++ Media Converter Physical Port • 1-port 10/100/1000BASE-T RJ45 with IEEE 802.3bt PoE Injector function • 1 SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual mode Power over Ethernet • Complies with IEEE 802.3bt PoE++ Type-4 PSE • Backward compatible with IEEE 802.3af/at PoE+ standard PLANET IGUP-805AT Industrial Gigabit Media Converter combines Ethernet media • 1 IEEE 802.
PAGE 2
IGUP-805AT Forward mechanism, and also can prevent packet loss with IEEE 802.3x flow control. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitor the network power usage. Plug and Play High Power Sourcing Solution Complying with the IEEE 802.3bt Power over Ethernet Plus Plus technology, the IGUP-805AT provides up to 95 watts of PoE output power, tripling that of the earlier 802.3at plus.
PAGE 3
IGUP-805AT Convenient and Reliable Power System To facilitate the 802.3bt power PoE++ usage with the commonly-used 12-48V DC power input for transportation and industrial-level applications, the IGUP805AT adopts the 12-48V DC to 56V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.
PAGE 4
IGUP-805AT Specifications Model IGUP-805AT Hardware Specifications Copper Port One 10/100/1000BASE-T port SFP Slot One 1000BASE-SX/LX/BX SFP interface Compatible with 100BASE-FX SFP Flow Control Back pressure for half duplex mode IEEE 802.
PAGE 5
IGUP-805AT IGUP-805AT Multi View Drawing Top View Fault PWR2 V2+ 1 DC Input: 12-56V , 6A max. ON OFF Enable Disable 2 Legacy BT Mounting Kit Front View 28.00 18.00 Side View 2 ON DIP 1 LFPP PoE 87.80 30.00 Max. fault loading: 24V, 1A V1+ PWR1 DIP Rear View Side View 15.20 P2 40.00 28.00 9.20 P1 Fault 30W 60W 90W+ 46.50 53.50 100/1000X LNK/ ACT 48.80 48.80 135.00 DIN-Rail Kit 53.50 LNK ACT PoE-in-Use 10/100/1000T 28.00 39.70 802.3bt PoE++ IGUP-805AT 18.00 87.
PAGE 6
IGUP-805AT Related Products Industrial 2-Port 100/1000X SFP to 1-Port 10/100/1000T 802.3bt PoE++ Media Converter Industrial 2-Port 100/1000X SFP to 2-Port 10/100/1000T 802.3bt PoE++ Media Converter Industrial Compact 100/1000BASE-X to 10/100/1000BASE-T 802.at PoE+ Media Converter 100/1000BASE-X to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (mini-GBIC, SFP) 1000BASE-SX to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter (SC,MM) -- 550m 1000BASE-LX to 10/100/1000BASE-T 802.
PAGE 7
IGUP-805AT Fast Ethernet Transceiver (100BASE-X SFP) Model MFB-FX MFB-F20 MFB-F40 MFB-F60 MFB-F120 MFB-TFX MFB-TF20 Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.