Datasheet

4
IGTP-802T/IGTP-802TS/IGTP-805AT
Outdoor
IP Camera
Outdoor
PoE Camera
Wireless
PoE AP
Emergency
VoIP Phone
1000BASE-SX/LX Fiber Optic
1000
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Remote Monitoring
Fiber Switch
Freeway
Data Center
IP Surveillance
Wireless Community
PoE
1000
1000
1000
1000
Internet
IGTP-805AT
IGTP-802TS
IGTP-802TS
IGTP-802T
PoE
Specications
Product
IGTP-802T IGTP-802TS IGTP-805AT
Ethernet Interface
Copper
10/100/1000BASE-T Ethernet TP interface. Maximum 100m distance.
Auto-negotiation, auto MDI/MDI-X with PoE injector function
1000BASE-X Fiber-optic Connector Type SC SC SFP (LC)
Fiber Cable
Multi-mode: 50/125µm or
62.5/125µm optic ber
Single-mode: 9/125µm optic be
Varying on SFP Module
Fiber Cable Distance 220m & 550m 20km
Fiber Optical Frequency 850nm 1310nm
Launch Power
Max. -3dBm
Min. -10dBm
Max. -3dBm
Min. -9dBm
Receive Sensitivity -20dBm -23dBm
Maximum Input Power -3dBm -3dBm
Power Over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
PoE Power Output
52V DC: 15.4 watts
52V DC: 30 watts
PoE Power Supply Type End-span
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 30 watts
Hardware Specications
Speed
Twisted-pair:
10/20Mbps for half/full duplex
100/200Mbps for half/full duplex
1000/2000Mbps for full duplex
Fiber Optic:
200Mbps / 2000Mbps for full duplex
Flow Control
Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode