User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HARDWARE INSTALLATION
- 3. INDUSTRIAL MEDIA CONVERTER MANAGEMENT
- 4. WEB MANAGEMENT
- 5. TROUBLE SHOOTING
- APPENDIX A NETWORKING CONNECTION
- EC Declaration of Conformity
User’s Manual of IGT-90x
Figure 4-7 Firmware Upgrade Web page screen
After find the firmware location from administrator PC, press “Upgrade” button to start the firmware upgrade process.
The screen in Figure 4-8 & 4-9 appears.
Figure 4-8 Firmware Upgrade Web page screen
Do not power off the converter until the update progress is complete.
Do not quit the Firmware Upgrade page without press the “Upgrade” button - after the image is
loaded. Or the system won’t apply the new firmware. Users have to repeat the firmware
upgrade processes again.
-29-