IGT-90x Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HARDWARE INSTALLATION
- 3. INDUSTRIAL MEDIA CONVERTER MANAGEMENT
- 4. WEB MANAGEMENT
- 5. TROUBLE SHOOTING
- APPENDIX A NETWORKING CONNECTION
- EC Declaration of Conformity
User’s Manual of IGT-90x
Default VLANs
The Industrial Managed Media Converter initially configures one VLAN, VID = 1, called "default." The factory default
setting assigns all ports on the Industrial Managed Media Converter to the "default". As new VLAN are configured in
Port-based mode, their respective member ports are removed from the "default."
4.5.1 VLAN Group
This function allows disable or enable the IEEE 802.1Q VLAN operation mode. Press the “Apply” button to save the
current configuration of Industrial Managed Media Converter. The screen in Figure 4-26 & 4-27 appears and Table 4-9
describes the VLAN Group object of Industrial Managed Media Converter.
Figure 4-26 VLAN Group Web Page screen
-45-