Datasheet
IGT-1205AT/IGT-2205AT
4
Specications
Model
IGT-1205AT IGT-2205AT
HardwareSpecications
Copper Interface 1 x 10/100/1000BASE-T RJ45 2 x 10/100/1000BASE-T RJ45
Fiber Optic Interfaces
2 x 100/1G/2.5GBASE-X SFP interfaces (Port-1 and Port-2)
Supports auto detection
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
LED
System and Power:
■Green:Power1
■Green:Power2
■Red:Alarm
Per Copper Port (Port-3~Port-4):
■Green:1GLNK/ACT
■Amber:100LNK/ACT
SFP interface (Port-1~ Port-2)
■Green+Amber:2.5GLNK/ACT
■Green:1GLNK/ACT
■Amber:100LNK/ACT
DIP Switch
Position Function
ON Fiber Redundancy
OFF (default) Switch Mode
Alarm
Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
Power Requirements
DC 12~48V or AC 24V
Redundant power with reverse polarity protection
Power Consumption / Dissipation 4.8 watts/16BTU 4.92 watts/16.9BTU
Dimensions (W x D x H) 32 x 87 x 135mm 32 x 87 x 135mm
Weight 412g 419g
Enclosure IP30 type metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
SwitchingSpecications
Processing Scheme Store-and-Forward
Fabric 12Gbps 14G
Throughput (packet per second) 8.93Mpps@64bytes 10.42Mpps@64bytes
Flow Control
Back pressure for half duplex.
IEEE 802.3x pause frame for full duplex
Address Table 4K entries
Jumbo Frame 9216bytes
Standards Conformance
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE802.3zGigabitEthernet1000BASE-SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.1p Class of Service
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27(shock)
IEC60068-2-6 (vibration)
Environment
Temperature
Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity
Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)