(V3) User Manual

User’s Manual of IGSW-24040T
Local Clock Curre
nt Time
Object Description
Show
s the actual PTP time with nanosecond resolution.
 PTP Time
Show
s the actual clock adjustment method. The method depends on the
available hardware.
 Clock Adjustment
Method
 Synchronize to System
Clock
Activate this button to synchronize the System Clock to PTP Time.
Click to edit the port data set
for the ports assigned to this clock instance.
 Ports Configuration
Clock Default Data Set
Object Description
An internal instance id (0..3)
 Clo
ck ID
Indicates the T
ype of the Clock Instance. There are five Device Types.
 Ord-Bound - clock's Device Type is Ordinary-Boundary Clock.
 P2p Transp - clock's Device Type is Peer to Peer Transparent
Clock.
 E2e Transp - clock's Device Type is End to End Transparent
Clock.
 Master Only - clock's Device Type is Master Only.
Slave Only - clock's Device Type is Slave Only
 Device Type
Static member: define
d by the system, true if two-step Sync events and
Pdelay_Resp events are used
 2 Step Flag
The total numb
er of physical ports in the node
 Ports
It show
s unique clock identifier
 Clock Identity
Clock domain [0..127].
 Dom
The clock quali
ty is determined by the system, and holds 3 parts: Clock Class,
Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588.
The Clock Accuracy values are defined in IEEE1588 table 6 (Currently the clock
Accuracy is set to 'Unknown' as default).
 Clock Quality
Clock prio
rity 1 [0..255] used by the BMC master select algorithm.
 Pri1
Clock prio
rity 2 [0..255] used by the BMC master select algorithm.
 Pri2
 Protocol
Transport protocol used by the PTP protocol engine
ethernet PTP over Ethernet multicast
ip4multi PTP over IPv4 multicast
ip4uni PTP over IPv4 unicast
335