(V3) User Manual

User’s Manual of IGSW-24040T
loop is detected (and the port action shuts down the port). Valid values are 0 to
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).
Port Configuration
Object Description
The s
witch port number of the port.
 Port
Controls
whether loop protection is enabled on this switch port.
 Enable
Configures th
e action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
 Action
Controls
whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
 Tx Mode
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.16.2 Loop Protection Status
This page displays the loop protection port status of the switch; screen in Figure 4-16-2 appears.
Figure 4-16-2: Loop Protection Status Screenshot
The page includes the following fields:
Object Description
The Industrial Mana
ged Switch port number of the logical port.
 Port
The currentl
y configured port action.
 Action
The currentl
y configured port transmit mode.
 Transmit
The number of loop
s detected on this port.
 Loops
The current loo
p protection status of the port.
 Status
Whether a lo
op is currently detected on the port.
 Loop
 Time of Last Loop
The time of the last loop event detected.
321