(V3) User Manual

Table Of Contents
User’s Manual of IGSW-24040T
4.9.13 Storm Control Configuration
Storm control for the switch is configured on this page. There is a unicast storm rate control, multicast storm rate control, and a
broadcast storm rate control. These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC
Address table.
The configuration indicates the permitted packet rate for unicast, multicast or broadcast traffic across the switch.
The Storm Control Configuration screen in Figure 4-9-15 appears.
Figure 4-9-15: Storm Control Configuration page Screenshot
The page includes the following fields:
Object Description
The port number for
which the configuration below applies.
Port
The settings in a p
articular row apply to the frame type listed here:
unicast
multicast
Broadcast
Frame Type
Enable or d
isable the storm control status for the given frame type.
Enable
The rate unit is p
ackets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64,
128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K , 1024K,
2048K, 4096K, 8192K, 16384K or 32768K.
Rate
207