Datasheet

3
IGSW-24040T
• IGMPsnoopingportltering
• MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based/MAC-based network access
authentication
– IEEE 802.1x authentication with guest VLAN
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List (ACL)
• Source MAC/IP address binding
• DHCP SnoopingtolterdistrustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard preventsIPspoongattacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet command line interface
– Web switch management
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access
• IPv6 address/NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Reset button for system reboot or reset to factory default
– Dual images
• DHCP Server
• DHCP relay and option 82
• User privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network diagnostic
– SFP-DDM (Digital Diagnostic Monitor)
Effective Alarm Alert for Better Protection
The IGSW-24040T supports a Fault Alarm feature which can alert the users when
there is something wrong with the switches. With this ideal feature, the users
wouldnothavetowastetimetondwheretheproblemis.Itwillhelptosavetime
and human resource.
RJ45/Fiber
Connection Link Down
Fault Alarm Feature
SNMP
TRAP
Mail
or
System
Log
AC/DC Power
Failure
IPv6/IPv4 Dual Stack Management
Supporting both IPv6 and IPv4 protocols, the IGSW-24040T help the SMBs to step
in the IPv6 era with the lowest investment as their network facilities need not be
replaced or overhauled if the IPv6 FTTx edge network is set up.
Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
The IGSW-24040T offers IPv4/IPv6 VLAN routing feature which allows to crossover
different VLANs and different IP addresses for the purpose of having a highly-
secured,exiblemanagementandsimplernetworkingapplication.
Robust Layer 2 Features
The IGSW-24040T can be programmed for advanced switch management
functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q
VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP
snooping, and MLD snooping. Via the link aggregation, the IGSW-24040T allows
the operation of a high-speed trunk to combine with multiple ports, and supports
fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2
protocol included to help discover basic information about neighboring devices on
the local broadcast domain.
L2/L4
Managed Switch
L2/L4
Managed Switch
Q-in-Q
MSTP
MLD
LLDP
IGMP
QoS
LACP