User's Manual

14
2.2.1 DIN-Rail Mounting
The DIN-Rail is screwed on the Industrial Gigabit Ethernet Switch when
out of factory. When you need to replace the wall mount application
with DIN-Rail application on Industrial Gigabit Ethernet, please refer
to the following gures to screw the DIN-Rail on the Industrial Gigabit
Ethernet Switch. To hang the Industrial Gigabit Ethernet Switch, follow
the steps below:
Step 1: Screw the DIN-Rail on the Industrial Gigabit Ethernet Switch.
Step 2: Place the bottom of DIN-Rail lightly into the track.