Datasheet

IGS-801T
1
8-Port 10/100/1000Mbps Industrial Gigabit
Ethernet Switch w/ Wide Operating Temperature
Slim Type with More Practicability and Convenience
PLANET IGS-801T advanced, slim-type, industrial, hardened Gigabit Ethernet Switch
with IP30 metal case consists of 8 10/100/1000Mbps auto negotiation ports and thus, it
operates reliably in heavy industrial demanding environments.
Its compact IP30-rated metal case features either DIN rail or wall mount for the efcient
use of cabinet space.
Energy Saving with Lower Power Consumption
The IGS-801T, adopting the advanced green networking technology, provides the link-
on cable length power saving and link-down power saving methods. These features
makes the IGS-801T consume very low power in full load operation mode, which helps
conserve energy effectively but maintains high performance efciently.
Green Networking
With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE)
Protocol, the IGS-801T can automatically detect cable link status and network traffic,
and thus is able to adjust power consumption accordingly. It enables the switches to
consume less power when they are less active.
Stable Performance under Difcult Environments
The IGS-801T provides a high level of immunity against electromagnetic interference
and heavy electrical surges which are usually found on plant oors or in curb-side trafc
control cabinets. Being able to operate under the temperature range from -40 to 75
degrees C, the IGS-801T can be placed in almost any difficult environment. The IGS-
801T also possesses an integrated power supply source with a wide range of voltages
(12 to 48V DC, 24V AC) for worldwide high availability applications requiring dual or
backup power inputs.
Physical Port
• 8-port 10/100/1000BASE-T RJ45 with auto MDI/MDI-X
function
Layer 2 Features
• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-
TX, IEEE 802.3ab 1000BASE-T Ethernet standard
• Supports auto-negotiation and 10/100Mbps half/full duplex and
1000Mbps full duplex mode
• High-performance Store and Forward architecture, broadcast
storm control and runt/CRC ltering eliminate erroneous
packets to optimize the network bandwidth
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
• 4K absolute MAC address and 16Gbps switching fabric
support
• 1.5Mbits SRAM packet buffer
• 9K jumbo packet size support
• IEEE 802.1p CoS support
• Automatic address learning and address aging
• CSMA/CD Protocol
Industrial Case and Installation
• IP30 metal case
• DIN rail and wall-mount design
• 12 to 48V DC, redundant power with polarity reverse protect
function and connective, removable terminal block for master
and slave power; 24V AC power support
• -40 to 75 degrees C operating temperature