(V2) Quick Guide

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
4. The Switch Menu on the left of the Web page lets
you access all the functions and status the Industrial
Managed Switch provides.
Now, you can use the Web management interface to
continue the Switch management. Please refer to the user
manual for more.
Note
For security reason, please change and
memorize the new password after this first
setup.
6.Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource on PLANET web site rst to check
if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Switch support team mail address:
[e-mail]
IGS-801M User’s Manual:
https://www.planet.com.tw/en/support/download.
php?&method=keyword&keyword=IGS-801M&view=3#list
Copyright © PLANET Technology Corp. 2019.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
5. Resetting the Switch to Default
To reset the IP address to the default IP Address
“192.168.0.100” and the user password to factory default
mode (default password is admin), press the hardware-
based reset button on the side panel for about 10 seconds.
After the device is rebooted, you can log in the
management Web interface within the same subnet of
192.168.0.xx and default password. Be noted that all the
previous setups will be disappeared after the factory default
reset is made.
RESET