User's Manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 5. SWITCH OPERATION
- Appendix A—RJ-45 Pin Assignment
- Appendix B Troubles shooting
- APPENDEX C : GLOSSARY
- EC Declaration of Conformity
User’s Manual of IGS-801M
2. Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. At this sample, add
Port-8 to be VLAN 2 and VLAN 3 member port.
Figure 4-5-17 Add VLAN Trunk port to each VLAN
3. Repeat Step 1 and 2, setup the VLAN Trunk port at the partner switch.
4. To add more VLANs to join the VLAN trunk, repeat Step 2 to assign the Trunk port to the VLANs.
67