User's Manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 5. SWITCH OPERATION
- Appendix A—RJ-45 Pin Assignment
- Appendix B Troubles shooting
- APPENDEX C : GLOSSARY
- EC Declaration of Conformity
User’s Manual of IGS-801M
Figure 4-5-11 A Server connect to the VLAN overlap area
1. Specify Port-7 on the device to connect to the server.
2. Assign Port-7 to both VLAN 2 and VLAN 3 at the VLAN Member configuration page. The screen in Figure 4-5-12
appears.
Figure 4-5-12 VLAN overlap port setting
64